1 /* 2 * Copyright (C) 2014 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 24 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 // ***************************************************************************** 39 // 40 // minimal setup for HCI code 41 // 42 // ***************************************************************************** 43 44 #include <stdint.h> 45 #include <stdio.h> 46 #include <stdlib.h> 47 #include <string.h> 48 #include <signal.h> 49 50 #include "btstack_config.h" 51 52 #include "btstack_debug.h" 53 #include "btstack_event.h" 54 #include "btstack_link_key_db_fs.h" 55 #include "btstack_memory.h" 56 #include "btstack_run_loop.h" 57 #include "btstack_run_loop_posix.h" 58 #include "hci.h" 59 #include "hci_dump.h" 60 #include "stdin_support.h" 61 62 #include "btstack_chipset_bcm.h" 63 #include "btstack_chipset_csr.h" 64 #include "btstack_chipset_cc256x.h" 65 #include "btstack_chipset_em9301.h" 66 #include "btstack_chipset_stlc2500d.h" 67 #include "btstack_chipset_tc3566x.h" 68 69 int is_bcm; 70 71 int btstack_main(int argc, const char * argv[]); 72 73 static hci_transport_config_uart_t config = { 74 HCI_TRANSPORT_CONFIG_UART, 75 115200, 76 0, // main baudrate 77 1, // flow control 78 NULL, 79 }; 80 81 static btstack_packet_callback_registration_t hci_event_callback_registration; 82 83 static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 84 if (packet_type != HCI_EVENT_PACKET) return; 85 switch (hci_event_packet_get_type(packet)){ 86 case BTSTACK_EVENT_STATE: 87 if (btstack_event_state_get_state(packet) != HCI_STATE_WORKING) break; 88 printf("BTstack up and running.\n"); 89 break; 90 case HCI_EVENT_COMMAND_COMPLETE: 91 if (HCI_EVENT_IS_COMMAND_COMPLETE(packet, hci_read_local_name)){ 92 // terminate, name 248 chars 93 packet[6+248] = 0; 94 printf("Local name: %s\n", &packet[6]); 95 if (is_bcm){ 96 btstack_chipset_bcm_set_device_name((const char *)&packet[6]); 97 } 98 } 99 break; 100 default: 101 break; 102 } 103 } 104 105 static void sigint_handler(int param){ 106 107 #ifndef _WIN32 108 // reset anyway 109 btstack_stdin_reset(); 110 #endif 111 112 log_info(" <= SIGINT received, shutting down..\n"); 113 hci_power_control(HCI_POWER_OFF); 114 hci_close(); 115 log_info("Good bye, see you.\n"); 116 exit(0); 117 } 118 119 static int led_state = 0; 120 void hal_led_toggle(void){ 121 led_state = 1 - led_state; 122 printf("LED State %u\n", led_state); 123 } 124 static void use_fast_uart(void){ 125 #if defined(HAVE_POSIX_B240000_MAPPED_TO_3000000) || defined(HAVE_POSIX_B600_MAPPED_TO_3000000) 126 printf("Using 3000000 baud.\n"); 127 config.baudrate_main = 3000000; 128 #elif defined(HAVE_POSIX_B1200_MAPPED_TO_2000000) || defined(HAVE_POSIX_B300_MAPPED_TO_2000000) 129 printf("Using 2000000 baud.\n"); 130 config.baudrate_main = 2000000; 131 #else 132 printf("Using 921600 baud.\n"); 133 config.baudrate_main = 921600; 134 #endif 135 } 136 137 static void local_version_information_callback(uint8_t * packet){ 138 printf("Local version information:\n"); 139 uint16_t hci_version = little_endian_read_16(packet, 4); 140 uint16_t hci_revision = little_endian_read_16(packet, 6); 141 uint16_t lmp_version = little_endian_read_16(packet, 8); 142 uint16_t manufacturer = little_endian_read_16(packet, 10); 143 uint16_t lmp_subversion = little_endian_read_16(packet, 12); 144 printf("- HCI Version 0x%04x\n", hci_version); 145 printf("- HCI Revision 0x%04x\n", hci_revision); 146 printf("- LMP Version 0x%04x\n", lmp_version); 147 printf("- LMP Revision 0x%04x\n", lmp_subversion); 148 printf("- Manufacturer 0x%04x\n", manufacturer); 149 switch (manufacturer){ 150 case COMPANY_ID_CAMBRIDGE_SILICON_RADIO: 151 printf("Cambridge Silicon Radio - CSR chipset.\n"); 152 use_fast_uart(); 153 hci_set_chipset(btstack_chipset_csr_instance()); 154 break; 155 case COMPANY_ID_TEXAS_INSTRUMENTS_INC: 156 printf("Texas Instruments - CC256x compatible chipset.\n"); 157 use_fast_uart(); 158 hci_set_chipset(btstack_chipset_cc256x_instance()); 159 #ifdef ENABLE_EHCILL 160 printf("eHCILL enabled.\n"); 161 #else 162 printf("eHCILL disable.\n"); 163 #endif 164 break; 165 case COMPANY_ID_BROADCOM_CORPORATION: 166 printf("Broadcom - using BCM driver.\n"); 167 hci_set_chipset(btstack_chipset_bcm_instance()); 168 is_bcm = 1; 169 break; 170 case COMPANY_ID_ST_MICROELECTRONICS: 171 printf("ST Microelectronics - using STLC2500d driver.\n"); 172 use_fast_uart(); 173 hci_set_chipset(btstack_chipset_stlc2500d_instance()); 174 break; 175 case COMPANY_ID_EM_MICROELECTRONICS_MARIN: 176 printf("EM Microelectronics - using EM9301 driver.\n"); 177 hci_set_chipset(btstack_chipset_em9301_instance()); 178 break; 179 case COMPANY_ID_NORDIC_SEMICONDUCTOR_ASA: 180 printf("Nordic Semiconductor nRF5 chipset.\n"); 181 break; 182 default: 183 printf("Unknown manufacturer / manufacturer not supported yet.\n"); 184 break; 185 } 186 } 187 188 int main(int argc, const char * argv[]){ 189 190 /// GET STARTED with BTstack /// 191 btstack_memory_init(); 192 btstack_run_loop_init(btstack_run_loop_posix_get_instance()); 193 194 // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT 195 hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); 196 197 // pick serial port 198 config.device_name = "/dev/tty.usbserial-A9GN71D5"; 199 200 // init HCI 201 const btstack_uart_block_t * uart_driver = btstack_uart_block_posix_instance(); 202 const hci_transport_t * transport = hci_transport_h4_instance(uart_driver); 203 const btstack_link_key_db_t * link_key_db = btstack_link_key_db_fs_instance(); 204 hci_init(transport, (void*) &config); 205 hci_set_link_key_db(link_key_db); 206 207 // inform about BTstack state 208 hci_event_callback_registration.callback = &packet_handler; 209 hci_add_event_handler(&hci_event_callback_registration); 210 211 // setup dynamic chipset driver setup 212 hci_set_local_version_information_callback(&local_version_information_callback); 213 214 // handle CTRL-c 215 signal(SIGINT, sigint_handler); 216 217 // setup app 218 btstack_main(argc, argv); 219 220 // go 221 btstack_run_loop_execute(); 222 223 return 0; 224 } 225