1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11### Added 12- GATT Client: gatt_client_add_service_changed_handler to receive Service Changed and Database Hash events 13- GATT Client: various _with_context functions that provide a service + connection id to GATT query events 14- GATT Service Client: generic client discovers characteristics and enabled notifications/indications 15- L2CAP: provide access to number of available credits in CBM/ECBM 16- HFP HF: support Apple Accessory information with: 17 - hfp_hf_apple_set_identification 18 - hfp_hf_apple_set_battery_level 19 - hfp_hf_apple_set_docked_state 20- HFP AG: report Apple Accessory information, battery level and docked state 21- PBAP Client: allow to set start offset and max list count for pull phonebook operation 22- PBAP Client: support multiple parallel connections 23- HID Parser: introduce HID Descriptor and HID Descriptor Usage iterators 24- HCI Dump Dispatch: allow to use multiple HCI Dump implementations 25- HCI Dump: support ISO packets in PacketLogger format 26- Immediate Alert Service Server and Client: added 27- Link Loss Service Server and Client: added 28- TX Power Service Client: added 29- btstack_util: safe wrappers for snprintf 30 31### Fixed 32- RFCOMM: shut down multiplexer after closing last channel instead of multiplexer idle timer 33- RFCOMM: fix multiple outgoing channel setup 34- HID Host: return complete HID report 35- SM: fix CTKD key distribution over BR/EDR 36- SM: fix CTKD after BR/EDR Role Change 37- A2DP: emit stream established if peer set-up configuration 38- AVDTP: fix SDP Client registration bug that could block other SDP queries 39- HIOS Client: emit disconnected event on HCI disconnect and free connection struct 40- Scan Parameter Service Client: emit disconnected event on HCI disconnect and free connection struct 41- PBAP Client: fix PBAP_SUBEVENT_OPERATION_COMPLETED with OBEX_DISCONNECTED for pbap_disconnect 42- HFP HF: send HF Indicator update only if enabled by AG 43- HFP AG: always initiate codec connection setup before establishing audio 44- HID Host: omit Report ID in Set/Get Report and send report for report id == HID_REPORT_ID_UNDEFINED 45- POSIX: clear run loop exit flag 46 47### Changed 48- GAP: return command disallowed if disconnect already requested 49- GAP: improve handling of incorrectly resolved addresses in HCI_SUBEVENT_LE_CONNECTION_COMPLETE 50- GAP: only store link key if at least one side requests bonding during the IO Capabilities exchange. 51- GOEP Client: remove goep_client_create_connection. Use goep_client_connect instead. 52- HID Parser: cleanup of function names and signatures 53- HIDS Client: use error code instead of att status in conencted event 54- Device Information Service Server: update for v1.2 55- Device Information Service Client: update for v1.2 56 57## Release v1.6.1 58 59### Added 60- GAP: support coordinated private random address updates 61- libusb: support send/receive of HCI ISO packets 62 63### Fixed 64- GAP: allow use of own address type different from gap_random_set_mode() incl. RPA in LE Extended Advertising 65- GAP: emit GAP_SUBEVENT_LE_CONNECTION_COMPLETE for failed outgoing connections 66- HCI: improved BIG setup/termination 67- L2CAP: set extended flow control bit in information response if enabled 68- SM: abort pairing with invalid parameter error for encryption key size > 16 69- SM: ignore Security Request after re-encryption has started 70- SM: respond to Pairing Request after Identity Resolution failed 71- SM: fix CTKD from Classic in Peripheral role 72- ATT Server: support delayed read responses for registered services 73- ATT Server: allow to start crypto operation from delayed att read/write request 74- HFP: use round robin for outgoing connections 75- HFP HF: send HF Indicator update only if enabled by AG 76- HFP AG: send OK after SLC for HF that does not support 3-way-calling or HF Indicators 77- HSP HS: use EV3 and 2EV3 packets for 7.5 ms voice interval 78- AVDTP: use round robin for outgoing connections 79- AVDTP: allow call to avdtp_disconnect before connection was established 80- A2DP: allow call to avdtp_disconnect before connection was established 81- AVRCP: use round robin for outgoing connections 82- GOEP Client: use round robin for outgoing connections 83- HID Host: use round robin for outgoing connections 84- HOG Host: emit GATTSERVICE_SUBEVENT_HID_REPORT for hids_client_send_write_report 85 86### Changed 87- HCI: hci_reserved_packet_buffer and higher layer functions asserts if packet buffer is free instead of return value 88- GAP: suppress GAP_SUBEVENT_LE_CONNECTION_COMPLETE for intermediate connection pause due to filterlist update 89- GAP: mutual authentication for legacy secure connections to prevent BIAS attacks was made optional with 90 ENABLE_MUTUAL_AUTHENTICATION_FOR_LEGACY_SECURE_CONNECTIONS. Not needed for default encryption key size of 16 91- HCI Dump: only log internal/BTstack events for ENABLE_LOG_BTSTACK_EVENTS 92 93## Release v1.6 94 95### Added 96- HCI: allow to configure Classic ACL packet types with hci_enable_acl_packet_types 97- GAP: emit generic GAP_SUBEVENT_LE_CONNECTION_COMPLETE for any LE Connection Complete 98- SM: support LE Secure Connection debug keys for testing 99- L2CAP: additional authorization_required param in l2cap_ecbm_register_service 100- GATT Client: support GATT over Enhanced LE Bearer 101- GATT Server: support GATT over Enhanced LE Bearer 102- A2DP: support SDP record without service name and/or provider 103- AVRCP: support SDP record without service name and/or provider 104- HFP: hfp_hf_create_sdp_record_with_codecs and hfp_hf_create_sdp_record_with_codecs 105- HFP: support for LC3-SWB 106- HFP: support SDP record without service name 107- PABP Server: support SDP record without service name 108- SPP Server: support SDP record without service name 109- HOG Device: emit HIDS_SUBEVENT_SET_REPORT 110- HOG Device: provide report for GET REPORT operation via callback 111- SBC Codec: new interface allows for multiple instances 112- LE Device DB: le_device_db_dump dumps LTK 113- Port for Zephyr 3.x 114- Port for FreeBSD that uses kernel netgraph HCI node 115 116### Fixed 117- HCI: fix remove le device from whitelist and periodic advertiser list 118- HCI: fix restart connect with whitelist after whitelist modification 119- GAP: store classic link keys independent from peer bonding request 120- SM: directly detect invalid Public key when Controller ECC is used 121- SM: sm: only set LinkKey flag in Pairing Request/Response if BR/EDR supported locally 122- L2CAP: make l2cap_get_remote_mtu_for_local_cid available to LE-only builds 123- L2CAP: handle all signaling requests and responses in closed state 124- HFP: use 'don't care' to accept SCO connections, fixes issue on ESP32 125- HFP: fix LC3-WB init 126- HFP AG: fix setup of audio connection in service level established event 127- HFP AG: fix BCM WBS setup 128- HFP AG: allow use of mSBC in subsequent audio connections after CSVD downgrade 129- HFP AG: fix terminate held call 130- HFP HF: send 'deactivate EC/NR' if supported in AG 131- HID Device: set Report Mode as default 132- HID Host: support large HID Descriptors 133- AVDTP: limit L2CAP MTU to largest BR/EDR packet, fixes A2DP Sink role for some Samsung TV 134- AVDTP: fix Get Stream Configuration 135- AVDTP: reject suspend in state endpoint open 136- AVDTP: return error in avdtp_suspend_stream if state is not streaming 137- AVRCP: reject incoming second l2cap connection 138- AVRCP: generate command for avrcp_controller_get_element_attributes dynamically 139- SPP Server: fix SPP version in SDP record 140- GATT Client: ignore notifications/indications until re-encrypted for bonded device without ENABLE_LE_PROACTIVE_AUTHENTICATION 141- btstack_flash_bank: support alignment larger than 4 142- windows: fix timestamps in packet logs 143 144### Changed 145- HCI: simplified implicit SCO flow control 146- HCI: return ERROR_CODE_COMMAND_DISALLOWED for outgoing connections in gap_connect 147- GAP: only return status code for errors in gap_connect 148- AVRCP: shorten default SDP Service and Provider Names 149- GATT Client: emit query complete event for gatt_client_discover_characteristic_descriptors in next run loop iteration 150- HFP: report HFP Version 1.9 in SDP record 151- HID Parser: ignore Report Items without Usage 152- btstack_crypto: allow MBEDTLS config via MBEDTLS_CONFIG_FILE 153- remove old Zephyr 1.9 port 154- ports: require CMake 3.12 for CMake projects 155 156## Release v1.5.6 157 158### Added 159- HCI: HCI_ACL_CHUNK_SIZE_ALIGNMENT allows to keep HCI transport writes aligned 160- GAP: support additional LE PHYs for scanning and outgoing connections 161- GATT Client: allow to queue requests with gatt_client_request_to_send_gatt_query and gatt_client_request_to_write_without_response 162- GATT Client: support GATT over BR/EDR transport via gatt_client_classic_connect 163- HFP: provide SCO packet types and rx/tx packet lengths in HFP_SUBEVENT_AUDIO_CONNECTION_ESTABLISHED 164- HFP: allow to register custom at commands with hfp_hf_register_custom_at_command 165- HFP: experimental support for LC3-SWB from HFP SWB draft with ENABLE_HFP_SUPER_WIDE_BAND_SPEECH 166- AVRCP: support Cover Art via avrcp_cover_art_client 167- example: gatt_streamer_server and le_streamer_client report DLE and PHY changes 168- NXP: support for NXP Controller with bootloader versions v1, e.g. NXP 88W8997, and v3, e.g. NXP IW416 or IW61x 169- esp32: support esp-idf v5.x audio driver 170- esp32: warn about sdkconfig issues 171- esp32: add BTstack component config options via menuconfig 172- esp32: allow to disable default audio i2s driver via component config 173- esp32: btstack_stdio_init configures buffered output, required for stdin support 174- Port for Renesas RA6M4 with DA14531 175- Port for NXP Controller on POSIX (posix-h4-nxp) 176- Port for newer Infineon Controller on POSIX (posix-h4-bcm) that requires autobaud-mode 177 178### Fixed 179- HCI: fix set extended scan response 180- HCI: fix report of extended advertisements with data len > 31 181- HCI: fix CTKD in Initiator role over BR/EDR SC when using dedicated bonding 182- SM: fix value in SM_EVENT_NUMERIC_COMPARISON_REQUEST 183- SM: ignore Security Request during re-encryption 184- GATT Client: return ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER for invalid connection handle 185- A2DP: emit A2DP_SUBEVENT_STREAM_ESTABLISHED with if connection fails, e.g. because of Page Timeout 186- A2DP Source: a2dp_source_stream_send_media_payload was removed, use a2dp_source_stream_send_media_payload_rtp instead 187- A2DP: use samples as timestamp, fixes issue with Apple Airpods Pro 2nd Gen 188- AVDTP Source: avdtp_source_stream_send_media_payload was removed, use avdtp_source_stream_send_media_payload_rtp instead 189- AVRCP: re-register for notification 190- BNEP: validate UUID32 and UUID128 service in connect request 191- HFP: fix setup/accept of synchronous connection 192- HFP: use mandatory safe settings considering BR/EDR Secure Connections to accept synchronous connections 193- HFP: avoid SCO packet types not supported either locally or remotely 194- HFP: remove trailing newline/carriage return in custom command event 195- PBAP Client: make pbap_set_property_selector work for Pull Phonebook 196- btstack_stdin_embedded: use timer to poll RTT input, fix for tickless RTOS 197- esp32: fix audio power amplifier control on Lyra T v4.3 board 198- tool/convert_gatt_service: removed as GATT Service descriptions not available on Bluetooth SIG web site 199 200### Changed 201- GAP: add gap_set_peer_privacy_mode with default LE_PRIVACY_MODE_DEVICE 202- GAP: use stack defaults for LE Connection Parameter Updates 203- GAP: set minimum and maximum CE length to 0 204- GAP: ENABLE_EXPLICIT_DEDICATED_BONDING_DISCONNECT disables disconnect after dedicated bonding 205- GOEP Client: support multiple instances 206- A2DP Sink: drop unused local seid argument in a2dp_sink_establish_stream 207- HFP: emit HFP_SUBEVENT_CUSTOM_AT_MESSAGE_SENT after sending custom command / unsolicited response code 208- sco_demo_util: replace hfp_msbc by hfp_codec 209- BCM: look for PatchRAM file with prefix DEVICE_NAME and extension '.hcd' 210- bluetooth: indicated identity address in resolved address type enums name 211- btstack_audio: added get_samplerate function to help with audio sample rate synchronization 212- btstack_flash_bank: write empty tag instead of overwriting existing tag with ENABLE_TLV_FLASH_WRITE_ONCE 213- esp32: drop support for Makefile projects from esp-idf 3.x 214- esp32: avoid deprecated btstack_run_loop_freertos API calls 215- esp32: use sample rate compensation in a2dp_sink_demo 216- stm32-f4discovery-cc256x: use external oscillator for better I2S clock 217- stm32-f4discovery: use sample rate compensation in a2dp_sink_demo 218 219 220## Release v1.5.5 221 222### Added 223- hci_dump_stdout: allow to truncate ACL, SCO and ISO packets with HCI_DUMP_STDOUT_MAX_SIZE_* 224- GATT Service: Broadcast Audio Scan Service Server and Client (BASS 1.0) 225- example/a2dp_source_demo: add command to scan and connect to Bluetooth speaker by class of device 226- OPP Server profile and OPP Server demo 227 228### Fixed 229- GAP: reload LE Resolving List after power-cycle 230- GAP: fix setting of LE Scan Response for data that needs to be fragmented 231- SM: fix pairing process with active ATT communication 232- ESP32: fix init for BR/EDR Only mode 233- ESP32: fix audio driver for sink + source mode 234- ESP32: fixes for ESP-IDF v5.x 235- ESP32: fix compile of non-BTstack examples after adding components/btstack 236 237### Changed 238- GAP: reload LE Filterlist and Periodic Advertiser List after power-cycle 239- SM: delete bonding information for existing device with BD_ADDR on new pairing with different IRK 240- Mesh: move GATT Services into src/mesh/gatt-service 241- LE Audio: move GATT Services into src/le-audio/gatt-service 242- libusb: improve implementation 243 244## Known Issues 245- ESP32: audio driver for ES8388/LyraT v4.3 not updated for esp-idf 5.x 246 247 248## Release v1.5.4 249 250### Added 251- HFP HF: send custom AT command with hfp_hf_send_at_command 252- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 253- HFP HF: provide Call Waiting information alpha field 254- HFP HF: add hfp_hf_set_default_microphone_gain and hfp_hf_set_set_default_speaker_gain for SLC 255- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 256- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 257- GAP: allow to enable duplicate filter for LE scanning with gap_set_scan_duplicate_filter 258- GAP: support BIG with gap_big_create and gap_big_terminate 259- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 260- GAP: support Periodic Advertisement Sync Transfer 261- PBAP Server profile and PBAP Server demo 262- OPP Client profile and OPP Client demo 263- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 264- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 265- Support for ESP32-C3 and ESP32-S3 266 267### Fixed 268- HCI: only add paired LE devices with IRK to resolving list 269- HCI: send HCI LE Create Connection Cancel only once for outgoing LE connections without whitelist 270- GAP: use static random address after power up 271- L2CAP: fix L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 272- SM: avoid potential loop during CTKD 273 274### Changed 275- HCI Dump: provide log level to log_message implementation 276- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 277 278 279## Release v1.5.3 280 281### Added 282- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 283- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 284- HFP HF: provide Calling Line Identification alpha field 285- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 286- GOEP Server 287- Chipset: support for firmware download and configuration of Realtek Controllers 288- PBAP Server and pbap_server_demo 289 290### Fixed 291- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 292- GAP: fix race condition that causes duplicate authenticate request 293- SM: address update for non-resolvable private addresses 294- SM: reset state on power off transition 295- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 296- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 297- HFP: try next link setting for SCO connection failure after SCO reject errors 298- HFP AG: activate all AG indicators upon service level connection establishment 299- HFP AG: handle call termination in alerting call state 300- HFP HF: fix parsing of phone number for voice tag 301- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 302 303### Changed 304- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 305- SM: pairing events indicate if LE Secure Connection will be used 306- A2DP: new a2dp.c contains shared code of Sink and Source roles 307- A2DP Sink: automatically configure stream endpoint for outgoing connections 308- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 309- libusb: command line options to delete TLV and specify log file path 310- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 311 312## Release v1.5.2 313 314### Added 315- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 316- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 317- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 318- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 319- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 320- GATT Service: Audio Input Control Service Server (AICS 1.0) 321- GATT Service: Microphone Control Service Server (MCS 1.0) 322- GATT Service: Published Audio Capabilities Service Server (PACS 1.0) 323- GATT Service: Volume Control Service Server (VCS 1.0) 324- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 325 326### Fixed 327- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 328- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 329- GAP: disable scanning, advertising, connection before updating random address 330- GAP: fix LE Scan with whitelist 331- HFP_AG: fix tracking for call dropped during outgoing ringing 332- HFP: Free HFP Connection object on SDP error / Service not found 333- PBAP Client: emit operation complete with status OBEX_ABORTED 334 335### Changed 336- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 337- GAP: set min encryption key size during init, if supported 338- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 339- ATT Server: use uint8_t for status returns 340- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 341 342 343## Release v1.5.1 344 345### Added 346- GOEP Client: add goep_client_version_20_or_higher 347- ESP32: implement audio source 348 349### Fixed 350- PBAP Client: support disconnect while operation is ongoing 351- PBAP Client: use SRM only if GOEP v2.0 or higher connection 352- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 353- L2CAP: limit remote MTU by local tx configuration in ERTM 354 355### Changed 356- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 357- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 358- ESP32: use I2S configuration from ESP32 LyraT V4.3 359 360 361## Release v1.5.0 362 363### Added 364- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 365- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 366- HCI: hci_remove_event_handler to remove packet handler 367- hci_cmd: support variable length fields and arrayed parameters 368- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 369- GAP: gap_set_page_timeout to set Page Timeout 370- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 371- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 372- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 373- A2DP: allow to register media codec validator for sink and source with: 374 - `a2dp_sink_register_media_config_validator` 375 - `a2dp_source_register_media_config_validator` 376- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 377- OBEX: new obex_parser for chunked OBEX data 378- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 379- SM: sm_remove_event_handler to remove packet handler 380- GATT Service: Bond Management Service (BMS 1.0) Server 381- GATT Service: Microphone Control Service (MICS 1.0) Server 382- GATT Service: TX Power Service (TPS 1.0) Server 383- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 384- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 385 386### Fixed 387- A2DP Source: fix reconfigure 388- AVRCP Controller: prevent registering of notifications for unsupported events 389- RFCOMM: fixed handling of remote port configuration command 390- HFP AG: fix accept incoming connection while audio connection is established 391- PBAP Client: handle chunked vCard Listing 392- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 393- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 394- SM: support storing bonding information for devices with identical IRK but different public addresses 395- GAP: restart advertising when private address changes 396- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 397 398### Changed 399- Drop iOS support 400- HCI: provide status instead of undocumented int error code and bool for API functions 401- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 402- GAP: local name, EIR data, class of device and default link policy can be updated at any time 403- L2CAP: provide status instead of undocumented int error code and bool for API functions 404- L2CAP: remote features not required for SDP connections 405- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 406- L2CAP: drop reason parameter in l2cap_disconnect 407- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 408- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 409- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 410- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 411- RFCOMM: provide status instead of undocumented int error code and bool for API functions 412- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 413- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 414- HFP: API functions return status code if appropriate 415- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 416- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 417- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 418- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 419- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 420- AVRCP: use PANEL as default unit + subunit info 421- AVRCP Controller: automatically query supported events when registering for notifications 422- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 423- Run Loop: new functionality for HCI transport drivers and inter-process communication: 424 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 425 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 426 - *btstack_run_loop_trigger_exit*: trigger run loop exit 427- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 428- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 429 430 431## Release v1.4.1 432 433### Added 434- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 435 436### Fixed 437- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 438- GAP: avoid requesting authentication twice 439- GAP: cache own address on start advertising and connecting, provide getters 440- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 441- SM: fix race condition between local address changes and pairing procedure 442- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 443 444### Changed 445- HCI: update advertising data without stopping advertising first 446- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 447- GAP: return status for `gap_set_security_mode` 448- GAP: abort legacy pairing if Level 4 is required 449- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 450- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 451- GAP: validate minimal service security level can be reached during pairing in responder role 452- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 453- CVE-2020-26555: reject connections to and from devices with same BD ADDR 454- CVE-2020-26555: ignore NULL link key 455- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 456 457## Release v1.4 458 459### Added 460- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 461- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 462- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 463 - support sending and receiving SLIP frames for HCI H5 464 - support odd parity 465 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 466- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 467- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 468- GATT Client: Battery Service Client 469- GATT Client: Device Information Service Client 470- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 471- GATT Client: Scan Parameters Service Client 472- GATT Server: Scan Parameters Service Server 473- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 474- GAP: support sniff subrating with `gap_sniff_subrating_configure` 475- GAP: support QoS setup with `gap_qos_set` 476- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 477- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 478- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 479- AVRCP Controller: reassemble fragmented AVCTP packets 480- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 481- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 482 483### Fixed 484- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 485- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 486- GAP: allow to disable link supervision timeout 487- GAP: fix `gap_connect` after `gap_connect_cancel` 488- GAP: re-configure advertisements after power cycle 489- HCI: handle start inquiry failure 490- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 491- L2CAP: return unknown mandatory option in config response 492- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 493- AVRCP Target: fix notification changed event 494- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 495- HFP HF: fix audio connection setup if codec negotiation is supported 496- HFP HF: only emit single event for RING and AG Status updates 497- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 498 499### Changed 500- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 501 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 502 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 503 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 504 - iOS: not supported 505- Run Loop Base: functionality used in most platform run loop implementations 506 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 507 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 508- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 509 - `posix/hci_dump_posix_fs` - writes binary log file 510 - `posix/hci_dump_stdout` - log to console using printf with local system time 511 - `embedded/hci_dump_embedded_stdout` - log to console using printf 512 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 513 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 514- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 515- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 516- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 517- POSIX Ports: use new `btstack_uart_posix` implementation 518- posix-h5/posix-h5-bcm: use even parity for UART 519- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 520- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 521- GAP: only store link key if it allows requested security level 522- GAP: abort SSP pairing if MITM protection required but not possible 523- SM: start pairing as Central for already encrypted connection on Slave Security Request 524- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 525- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 526- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 527 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 528- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 529 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 530- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 531- HFP: provide acl_handle in events to identify connection 532- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 533- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 534 535 536## Release v1.3.2 537 538### Added 539- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 540- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 541- HID Host: add profile, update `hid_host_demo.c` example 542 543### Fixed 544- L2CAP: make handling of HCI disconnect more robust 545- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 546- AVRCP: fix issue when Controller and Target send at the same time 547 548### Changed 549- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 550 551 552## Release v1.3 553 554### Added 555- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 556- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 557- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 558- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 559- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 560- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 561- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 562- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 563- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 564 565### Fixed 566- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 567- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 568- HFP AG/HSP AG: avoid connecting to remote service with same role 569- A2DP Source: support multiple Stream Endpoints with different Media Codec types 570- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 571- GATT Compiler: support multiple instances of the same service 572 573### Changed 574- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 575- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 576- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 577- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 578- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 579- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 580- Ports: STM32-F103RB Nucleo + CC256x port removed 581- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 582 583 584## Release v1.2.1 585 586### Fixed 587- L2CAP: use connection handle for channel lookups 588- L2CAP: forward data only in open state 589 590### Changed 591- L2CAP: check packet size against local mtu for classic basic channels 592 593 594## Release v1.2 595 596### Fixed 597- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 598- SM: fix update of sc flag for re-encrypted connection in peripheral role 599- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 600- ESP32: fix audio sink driver 601 602### Added 603- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 604- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 605- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 606- SM: emit events for re-encryption started/complete when bonding information is available 607 608### Changed 609- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 610- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 611 612 613## Changes October 2020 614 615### Fixed 616- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 617- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 618- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 619- SM: set LinkKey flag to request CTKD if enabled 620- SM: store CTKD key with Public Identity Address 621- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 622- SM: start SMP Timeout when sending Security Request 623- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 624- HCI: fix reject of LE remote connection param request via HCI 625 626### Added 627- GAP: add `gap_get_link_key_for_bd_addr` 628- GAP: add `gap_bonded` to check if bonding information is available for active connection 629- SM: support h7 for CTKD 630 631### Changed 632- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 633- SM: block connection if encryption fails for bonded devices as Central 634- SM: support pairing as Central after failed re-encryption 635 636 637## Release v1.1 638 639### Fixed 640- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 641 642### Added 643 644### Changed 645 646 647## Changes September 2020 648 649### Fixed 650- HFP: fix parsing of ranges e.g. in +CIND responses 651- AVDTP, AVRCP: fix bugs due to transaction id overrun 652- A2DP Source: fix issues with stream configuration by sink 653- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 654 655### Added 656- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 657- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 658 659### Changed 660- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 661- HSP, HFP: allow to configure usable SCO packet types 662- cc256x: update CC256xC init script to v1.4 663- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 664 665## Changes August 2020 666 667### Fixed 668- ESP32: fix authentication for incoming Secure Connections 669- AVDTP: Fix forwarding of Delay reports 670- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 671- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 672 673### Added 674- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 675- GAP: request role change for classic connection via `gap_request_role` 676- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 677- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 678- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 679- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 680- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 681- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 682 683### Changed 684- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 685- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 686- example/hid_host_demo: try to become master for incoming connections 687- btstack_run_loop: use btstack_assert instead of local while(true) 688- att_db_util: allow to reset att_db via `att_db_util_init` 689 690## Changes July 2020 691 692### Fixed 693- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 694- AVDTP: handle concurrent signaling establishment with reject and retry 695 696### Added 697- example/hid_host_demo: support reconnect from HID device 698- Crypto: support software AES128 for AES-CCM operations 699- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 700- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 701- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 702- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 703- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 704 705### Changed 706- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 707 708 709## Changes June 2020 710 711### Fixed 712- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 713- SM: Fix validation of confirm value for secure connection Passkey entry 714- AVRCP: handle concurrent signaling establishment with reject and retry 715 716### Added 717- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 718- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 719- Windows port for Dialog DA14585 connected via serial port 720 721## Changes 722- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 723 724## Changes May 2020 725 726### Fixed 727- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 728- pbap_client: fix PBAP UUID len on connect message 729- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 730- A2DP Source: only connect to remote sink stream endpoints 731- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 732- hsp_hs: fix disconnect if audio not connected 733- hsp_ag: fix accept incoming connection 734 735### Added 736- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 737- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 738- cc256x: allow to specify power vector for each modulation type 739- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 740- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 741- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 742 743### Changed 744- L2CAP ERTM: send extended features request only once per HCI connection 745 746 747## Changes April 2020 748 749### Fixed 750- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 751- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 752 753### Added 754- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 755- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 756- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 757 758### Changed 759- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 760- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 761- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 762 763 764## Changes March 2020 765 766### Fixed 767- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 768- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 769 770### Added 771- GATT Client: allow to register for any notification/indication and/or any connection 772- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 773- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 774- btstack_util: added btstack_replace_bd_addr_placeholder 775 776### Changed 777- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 778- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 779 780 781## Changes Februar 2020 782 783### Fixed 784- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 785- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 786 787### Changed 788- hid_host_mode: allow sniff mode 789 790### Added 791- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 792 793 794## Changes January 2020 795 796### Fixed 797- L2CAP ERTM: avoid read-after-free on decline of incoming connection 798- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 799- att_db_util: fix realloc of att db buffer for large attributes 800- btstack_tlv_posix: only keep last value in memory, fix delete operation 801- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 802 803### Added 804- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 805- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 806- ATT Server: validate request pdu length 807 808### Changed 809- Crypto: update AES-CMAC implementation to access all message bytes sequentially 810 811 812## Changes December 2019 813 814### Fixed 815- example/pan_lwip_http_server: use Network Access Point, CoD 816- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 817 818### Added 819 820### Changed 821- Updated CC256x initscript: CC256xC v1.3 822- ESP32: add CMake project files 823 824 825## Changes November 2019 826 827### Fixed 828- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 829- L2CAP: send LE Data Channel SDUs round robin with other data 830- L2CAP ERTM: send ERTM I-frames round robin with other data 831 832### Added 833- ATT Server: return error if request to send now for Notification or Indication already registered 834- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 835- btstack_run_loop_remove: return bool true if timer/data source was removed 836- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 837- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 838- lwip: add download test files to http server demo 839 840### Changed 841- Linked List: return bool true if item was removed 842 843 844## Changes October 2019 845 846### Fixed 847 848### Added 849- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 850- provide `btstack_assert(condition)` 851- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 852 853### Changed 854- libusb and posix ports: store bonding information in TLV 855 856 857## Changes September 2019 858 859### Fixed 860- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 861- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 862- GATT Client: allow Write Without Response independent of other requests 863 864### Added 865- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 866- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 867 868### Changed 869- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 870- bluetooth.h: extract internal defintitions to respective protocol layers 871- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 872 873 874## Changes August 2019 875 876### Fixed 877- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 878- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 879- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 880- L2CAP ERTM: stop timers on disconnect 881- L2CAP ERTM: fix sending of segmented SDUs 882- L2CAP ERTM: handle unsupported Information Response 883- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 884 885### Added 886- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 887 888## Changed 889- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 890- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 891- POSIX: use monotonic clock as timebase if available 892- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 893- HCI: Read Encryption Key Size after encryption was enabled 894- Errata 11838: 895 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 896 - GAP: validate encryption key size to emit GAP Security Levels 897 898## Changes July 2019 899 900### Fixed 901- SM: Fixed regression introduced in f3582630 902- L2CAP: avoid reading l2cap signaling command len out of bounds 903- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 904 905### Changed 906- SM: Start encryption upon receiving slave securiy request if bonded 907- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 908 909--- 910 911## Changes June 2019 912 913### Changed 914- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 915- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 916- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate support for GATT over BR/EDR 917 918### Fixed 919- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 920- libusb: avoid use-after-free for SCO packets on disconnect 921 922### Added 923- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 924- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 925- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 926 927--- 928 929## Changes May 2019 930 931### Changed 932- ESP32: Configure SCO over HCI after power up 933- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 934 is defined, an explicit delete field is used to indicate an invalid entry. 935 936### Fixed 937- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 938 939### Added 940- gatt_client: emit query complete event for signed write operation 941- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 942 943--- 944 945## Changes April 2019 946 947### Changed 948- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 949 950### Fixed 951- hci: pad LE Scan response with zeroes 952- SM: store local CSRK 953- ATT DB: call write callback for validated signed writes 954- ATT Server: abort signed write validation on incoming new request 955- Bluetooth SIG web scraping tools updated 956- libusb: compiles for FreeBSD 957 958### Added 959 960--- 961 962## Changes March 2019 963 964### Changed 965- use Makefile for stm32-f4discovery-cc256x port 966- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 967 968### Fixed 969- SM: Use provided authentication requirements in slave security request 970 971### Added 972- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 973- SM: Track if connection encryption is based on LE Secure Connection pairing 974- ATT DB: Validate if connection encrypted is based on SC if requested 975- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 976- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 977- ESP32: erase nvs flash is newer nvs version found 978- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 979- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 980 981## Changes February 2019 982 983### Changed 984- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 985- btstack_audio: split interface into sink and source 986 987### Fixed 988- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 989- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 990 991### Added 992- example/a2dp_sink_demo: add target role, support volume control on both devices 993- example/audio_duplex: playback audio audio source on audio sink (test audio path) 994- btstack_audio_embedded: implement audio source path 995 996--- 997 998## Changes January 2019 999 1000### Changed 1001- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 1002- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 1003 1004### Added 1005- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 1006- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 1007- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 1008- ad_parser: validate data element length fields in ad_iterator_has_more 1009- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 1010 1011### Fixed 1012- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 1013- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 1014- Crypto: directly process queued crypto operation on HCI result 1015 1016--- 1017 1018## Changes December 2018 1019 1020### Added 1021- SM: generate and store ER / IR keys in TLV, unless manually set by application 1022- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 1023 1024### Fixed 1025- SM: fix internal buffer overrun during random address generation 1026 1027## Changes November 2018 1028 1029### Added 1030- GAP: gap_le_connection_interval provides connection interval for conn handle 1031- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 1032- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 1033- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 1034- SM: generate and store ER / IR keys in TLV, unless manually set by application 1035 1036### Fixed 1037- SM: prevent random address updates if gap_random_address_set was used 1038- SM: fix internal buffer overrun that can cause storing of bonding information to fail 1039- SM: ignore Slave Security Request after sending own Pairing Request 1040- L2CAP: fix use after free on disconnect if ERTM is enabled 1041- HFP: Handle multiple commands/responses in single RFCOMM packet 1042- Memory Pools: clear all buffers before use 1043 1044--- 1045 1046## Changes October 2018 1047 1048### Added 1049- SDP Server: queue incoming connections when already connected instead of rejecting them 1050- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 1051- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 1052 1053### Fixed 1054- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 1055- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 1056- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 1057- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 1058- L2CAP ERTM: fix outgoing fragment management 1059- HFP: decline incoming RFCOMM connection after outgoing connection was started 1060- AVRCP: fix crash on disconnect of connection established by remote 1061 1062--- 1063 1064## Changes September 2018 1065 1066### Fixed 1067- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 1068- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 1069- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 1070- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 1071- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 1072- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 1073- RFCOMM: Avoid use-after-free on channel finalize 1074- GATT Client: stop timer on disconnect - fixes use after free / crash 1075 1076### Added 1077- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 1078- 3rd-party: yxml is used for PBAP vCard list parsing 1079- cc256xC: new v1.1 init scripts 1080 1081--- 1082 1083## Changes August 2018 1084 1085### Added 1086- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 1087 1088### Fixed 1089- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 1090- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 1091- SM: drop LTK flag from Pairing Response for Secure Connections 1092- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 1093 1094## Changes June 2018 1095 1096### Added 1097- btstack_audio.h: application level API for audio playback and recording 1098- embedded/hal_audio.h: low-level API for audio playback and recording 1099- HID Device: hid_device_connect(..) function 1100- ESP32: implement hal_audio 1101- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 1102- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 1103 1104### Changed 1105- Errata 10734: 1106 - SM: Generate new EC Public Keypair after each pairing 1107 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 1108- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 1109- windows: ignore virtual Bluetooth adapter provided by VMware 1110- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 1111 1112--- 1113 1114## Changes June 2018 1115 1116### Fixed 1117- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 1118- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 1119- AVRCP Controller: fix parsing of now playing info 1120 1121### Changed 1122- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 1123 1124### Added 1125- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 1126 1127--- 1128 1129## Changes May 2018 1130 1131### Added 1132- GAP: re-encrypt outgoing connection if bonded 1133- ATT Server: wait until re-encryption is complete 1134- GATT Client: wait until re-encryption is complete 1135- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 1136- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 1137 1138### Changed 1139- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 1140 1141### Fixed 1142- SM: Fix LE Secure Connection pairing in Central role 1143- le_device_db_tlv: fix seq nr management 1144- SM: improve le_device_db lookup and storing of IRK 1145- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 1146- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 1147 1148--- 1149 1150## Changes April 2018 1151 1152### Added 1153- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 1154- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 1155- Embedded: support btstack_stdin via SEGGER RTT 1156 1157### Changed 1158- att_db_util: added security requirement arguments to characteristic creators 1159- SM: use btstack_crypto for cryptographpic functions 1160- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 1161 1162### Fixed 1163- HFP: fix answer call command 1164- HCI: fix buffer overrun in gap_inquiry_explode 1165- SDP: free service record item on sdp_unregister_service 1166 1167## Changes March 2018 1168 1169### Added 1170- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 1171- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 1172- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 1173 1174### Fixed 1175- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 1176- HSP HS: accept incomming SCO connection 1177- SM: fix iteration over LE Device DB entries for bonding and address resolving 1178- SM: store pairing information only if both devices have requested bonding 1179 1180--- 1181 1182## Changes February 2018 1183 1184### Added 1185- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 1186- SM: new event SM_EVENT_PAIRING_COMPLETE 1187- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 1188- GAP: add gap_delete_all_link_keys 1189 1190### Changed 1191- GATT Client: round robin for multiple connections 1192- ATT Dispatch: round robin for ATT Server & GATT Client 1193- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 1194- btstack_link_key_db: addition functions for link key iteration 1195- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 1196- CSR: set all keys in psram instead of default 1197 1198### Fixed 1199- tc3556x: fix startup after baud rate change 1200 1201--- 1202 1203## Changes January 2018 1204 1205### Added 1206- Port for Windows with Zephyr HCI Firmware connected via serial port 1207- em9304: upload patch containers during HCI bootup 1208- Makefile for STM32-F4Discovery port 1209- support for console out via SEGGER RTT 1210- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 1211- LE Streamer Client can send as fast as possbile as well 1212- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 1213 1214### Changed 1215- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 1216- GAP: gap_set_connection_parameters includes scan interval and window params 1217- GATT Client: GATT_EVENT_MTU indicates max MTU 1218- ATT DB Util: attribute handle is returned for new Services and Characteristics 1219 1220### Fixed 1221- Windows: retry serial port operations if not all bytes have been read/written 1222- HFP: avoid buffer overflows setting up messages 1223- SBC Decoder: improved error handling for invalid SBC audio data 1224- GAP: fix Connection Parameter Response in Central role 1225- ATT DB Util: update pointer to database in case of realloc 1226- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 1227- GAP: release HCI Connnection after gap_le_conne 1228- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 1229 1230--- 1231 1232## Changes December 2017 1233 1234### Added 1235- Introduced btstack_network.h network interface abstraction 1236- btstack_network_posix implementation using Linux tun/tap interface 1237- WICED: support for btstack_stdin (HAVE_STDIN) 1238- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 1239- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 1240- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 1241- LE Device DB TLV: overwrite oldest entry if no free entries available 1242- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 1243- Example/hid_host_demo with HID parser and support for basic US keyboard layout 1244- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 1245- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 1246 1247### Changed 1248- panu_demo: uses btstack_network.h now 1249- WICED: configure printf to replace Linefeed with CRLF 1250- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 1251 1252### Fixed 1253- RFCOMM: support connection requests during connection failure 1254- L2CAP: support connection requests during connection failure 1255- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1256- HCI: avoid double free during halting 1257- SM: fixed reconnect using legacy pairing in slave role 1258 1259 1260