| /linux-6.14.4/Documentation/devicetree/bindings/leds/ |
| D | allwinner,sun50i-a100-ledc.yaml | 70 description: Length of high pulse when transmitting a "0" bit
74 description: Length of low pulse when transmitting a "0" bit
78 description: Length of high pulse when transmitting a "1" bit
82 description: Length of low pulse when transmitting a "1" bit
|
| /linux-6.14.4/Documentation/devicetree/bindings/serial/ |
| D | nvidia,tegra194-tcu.yaml | 17 for transmitting and one for receiving, that is used to communicate
40 transmitting data from and to the hardware UART.
43 - description: mailbox for transmitting data to hardware UART
|
| /linux-6.14.4/drivers/misc/echo/ |
| D | echo.h | 69 If the adaption is performed while transmitting noise (or something fairly
71 performed while transmitting something highly correlative (typically narrow
85 the adaption process. Similarly, if the signal we are transmitting is small,
87 adaption is only performed when we are transmitting a significant signal level,
|
| /linux-6.14.4/net/mac802154/ |
| D | util.c | 21 * for both transmitting and receiving. Hence, the core currently only handles
47 * for both transmitting and receiving. Hence, the core currently only handles
50 * must then be stopped before transmitting.
|
| /linux-6.14.4/drivers/media/cec/core/ |
| D | cec-adap.c | 361 if (adap->transmitting == data) { in cec_data_cancel()
362 adap->transmitting = NULL; in cec_data_cancel()
413 if (adap->transmitting) in cec_flush()
440 * Wait until the thread should be stopped, or we are not transmitting and
441 * a new transmit message is queued up, in which case we start transmitting
442 * that message. When the adapter finished transmitting the message it will
463 * We are transmitting a message, so add a timeout in cec_thread_func()
496 if (adap->transmitting) in cec_thread_func()
497 cec_data_cancel(adap->transmitting, in cec_thread_func()
513 if (adap->transmitting) { in cec_thread_func()
[all …]
|
| /linux-6.14.4/Documentation/userspace-api/media/rc/ |
| D | lirc-get-send-mode.rst | 34 The mode used for transmitting.
65 - Device does not support transmitting.
|
| /linux-6.14.4/drivers/net/team/ |
| D | Kconfig | 33 Basic mode where port used for transmitting packets is selected in
45 Basic mode where port used for transmitting packets is selected
|
| /linux-6.14.4/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/ |
| D | pwrseq.h | 189 /*Should be zero if no packet is transmitting*/ \
193 /*Should be zero if no packet is transmitting*/ \
197 /*Should be zero if no packet is transmitting*/ \
201 /*Should be zero if no packet is transmitting*/ \
|
| /linux-6.14.4/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/ |
| D | pwrseq.h | 179 /*Should be zero if no packet is transmitting*/}, \
182 /*Should be zero if no packet is transmitting*/}, \
185 /*Should be zero if no packet is transmitting*/}, \
188 /*Should be zero if no packet is transmitting*/}, \
|
| /linux-6.14.4/Documentation/scsi/ |
| D | cxgb3i.rst | 18 On transmitting, Chelsio S3 h/w computes and inserts the Header and
32 On transmitting, S3 h/w accepts the complete PDU (header + data)
|
| /linux-6.14.4/Documentation/userspace-api/media/cec/ |
| D | cec-pin-error-inj.rst | 93 receiving CEC messages and those relating to transmitting CEC messages. In
158 keeps transmitting after the first byte was NACKed.
190 stop transmitting ('Arbitration Lost'). This is very hard to test,
200 This setting changes the behavior of transmitting CEC messages. Normally
293 Just stop transmitting after this bit. If <op> specifies a specific CEC
|
| /linux-6.14.4/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/ |
| D | pwrseq.h | 195 /*Should be zero if no packet is transmitting*/ \
198 /*Should be zero if no packet is transmitting*/ \
201 /*Should be zero if no packet is transmitting*/ \
204 /*Should be zero if no packet is transmitting*/ \
|
| /linux-6.14.4/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/ |
| D | pwrseq.h | 230 /*Should be zero if no packet is transmitting*/}, \
233 /*Should be zero if no packet is transmitting*/}, \
236 /*Should be zero if no packet is transmitting*/}, \
239 /*Should be zero if no packet is transmitting*/}, \
590 /*Should be zero if no packet is transmitting*/}, \
593 /*Should be zero if no packet is transmitting*/}, \
596 /*Should be zero if no packet is transmitting*/}, \
599 /*Should be zero if no packet is transmitting*/}, \
|
| /linux-6.14.4/Documentation/devicetree/bindings/soc/fsl/cpm_qe/ |
| D | fsl,ucc-hdlc.yaml | 83 slots used for transmitting and receiving.
90 slots used for transmitting and receiving.
|
| /linux-6.14.4/drivers/net/ethernet/aquantia/atlantic/macsec/ |
| D | macsec_struct.h | 705 * for this transmitting SC.
709 * this transmitting SC.
713 * but not encrypted on the transmitting SC.
717 * and encrypted on the transmitting SC.
726 /*! The number of dropped packets for this transmitting SA. */
731 * for this transmitting SA.
735 * this transmitting SA.
|
| /linux-6.14.4/include/uapi/linux/ |
| D | can.h | 145 * Error State Indicator - represents the error state of the transmitting node
147 * As the CANFD_ESI bit is internally generated by the transmitting CAN
161 #define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
|
| /linux-6.14.4/include/cxl/ |
| D | mailbox.h | 16 * @mbox_send: @dev specific transport for transmitting mailbox commands
|
| /linux-6.14.4/Documentation/userspace-api/media/v4l/ |
| D | field-order.rst | 16 rates similar to film the image would fade out too quickly. Transmitting
21 at a time, merely transmitting the frames separated into fields. The
|
| /linux-6.14.4/include/linux/phy/ |
| D | phy-mipi-dphy.h | 186 * state prior to transmitting the Sync sequence.
236 * the LP-10 state before transmitting the Bridge state
|
| /linux-6.14.4/drivers/net/wireless/realtek/rtlwifi/rtl8723be/ |
| D | pwrseq.h | 278 /*Should be zero if no packet is transmitting*/ \
281 /*Should be zero if no packet is transmitting*/ \
284 /*Should be zero if no packet is transmitting*/ \
287 /*Should be zero if no packet is transmitting*/ \
|
| /linux-6.14.4/Documentation/devicetree/bindings/media/ |
| D | st-rc.txt | 14 protocol used for transmitting remote control signals. tx-mode should
|
| /linux-6.14.4/Documentation/devicetree/bindings/display/ |
| D | lvds.yaml | 27 data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
|
| /linux-6.14.4/sound/usb/line6/ |
| D | midi.h | 24 /* MIDI substream for transmitting (or NULL if not active) */
|
| /linux-6.14.4/drivers/media/rc/ |
| D | redrat3.c | 223 /* Is the device currently transmitting?*/
224 bool transmitting; member
238 if (!rr3->transmitting && (code != 0x40)) in redrat3_dump_fw_error()
276 if (!rr3->transmitting) in redrat3_dump_fw_error()
760 if (rr3->transmitting) { in redrat3_transmit_ir()
769 rr3->transmitting = true; in redrat3_transmit_ir()
846 rr3->transmitting = false; in redrat3_transmit_ir()
|
| /linux-6.14.4/drivers/usb/serial/ |
| D | keyspan_usa28msg.h | 134 u8 _txOn, // enable transmitting (and continue if there's data)
135 _txOff, // stop transmitting
|