/* generated HAL source file - do not edit */
#include "hal_data.h"

flash_hp_instance_ctrl_t g_flash0_ctrl;
const flash_cfg_t g_flash0_cfg =
{ .data_flash_bgo = false, .p_callback = NULL, .p_context = NULL,
#if defined(VECTOR_NUMBER_FCU_FRDYI)
    .irq                 = VECTOR_NUMBER_FCU_FRDYI,
#else
  .irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_FCU_FIFERR)
    .err_irq             = VECTOR_NUMBER_FCU_FIFERR,
#else
  .err_irq = FSP_INVALID_VECTOR,
#endif
  .err_ipl = (BSP_IRQ_DISABLED),
  .ipl = (BSP_IRQ_DISABLED), };
/* Instance structure to use this module. */
const flash_instance_t g_flash0 =
{ .p_ctrl = &g_flash0_ctrl, .p_cfg = &g_flash0_cfg, .p_api = &g_flash_on_flash_hp };
gpt_instance_ctrl_t g_timer0_ctrl;
#if 0
const gpt_extended_pwm_cfg_t g_timer0_pwm_extend =
{
    .trough_ipl          = (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_GPT0_COUNTER_UNDERFLOW)
    .trough_irq          = VECTOR_NUMBER_GPT0_COUNTER_UNDERFLOW,
#else
    .trough_irq          = FSP_INVALID_VECTOR,
#endif
    .poeg_link           = GPT_POEG_LINK_POEG0,
    .output_disable      =  GPT_OUTPUT_DISABLE_NONE,
    .adc_trigger         =  GPT_ADC_TRIGGER_NONE,
    .dead_time_count_up  = 0,
    .dead_time_count_down = 0,
    .adc_a_compare_match = 0,
    .adc_b_compare_match = 0,
    .interrupt_skip_source = GPT_INTERRUPT_SKIP_SOURCE_NONE,
    .interrupt_skip_count  = GPT_INTERRUPT_SKIP_COUNT_0,
    .interrupt_skip_adc    = GPT_INTERRUPT_SKIP_ADC_NONE,
    .gtioca_disable_setting = GPT_GTIOC_DISABLE_PROHIBITED,
    .gtiocb_disable_setting = GPT_GTIOC_DISABLE_PROHIBITED,
};
#endif
const gpt_extended_cfg_t g_timer0_extend =
        { .gtioca =
        { .output_enabled = false, .stop_level = GPT_PIN_LEVEL_LOW },
          .gtiocb =
          { .output_enabled = false, .stop_level = GPT_PIN_LEVEL_LOW },
          .start_source = (gpt_source_t) (GPT_SOURCE_NONE), .stop_source = (gpt_source_t) (GPT_SOURCE_NONE), .clear_source =
                  (gpt_source_t) (GPT_SOURCE_NONE),
          .count_up_source = (gpt_source_t) (GPT_SOURCE_NONE), .count_down_source = (gpt_source_t) (GPT_SOURCE_NONE), .capture_a_source =
                  (gpt_source_t) (GPT_SOURCE_NONE),
          .capture_b_source = (gpt_source_t) (GPT_SOURCE_NONE), .capture_a_ipl = (BSP_IRQ_DISABLED), .capture_b_ipl =
                  (BSP_IRQ_DISABLED),
#if defined(VECTOR_NUMBER_GPT0_CAPTURE_COMPARE_A)
    .capture_a_irq       = VECTOR_NUMBER_GPT0_CAPTURE_COMPARE_A,
#else
          .capture_a_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_GPT0_CAPTURE_COMPARE_B)
    .capture_b_irq       = VECTOR_NUMBER_GPT0_CAPTURE_COMPARE_B,
#else
          .capture_b_irq = FSP_INVALID_VECTOR,
#endif
          .capture_filter_gtioca = GPT_CAPTURE_FILTER_NONE,
          .capture_filter_gtiocb = GPT_CAPTURE_FILTER_NONE,
#if 0
    .p_pwm_cfg                   = &g_timer0_pwm_extend,
#else
          .p_pwm_cfg = NULL,
#endif
#if 0
    .gtior_setting.gtior_b.gtioa  = (0U << 4U) | (0U << 2U) | (0U << 0U),
    .gtior_setting.gtior_b.oadflt = (uint32_t) GPT_PIN_LEVEL_LOW,
    .gtior_setting.gtior_b.oahld  = 0U,
    .gtior_setting.gtior_b.oae    = (uint32_t) false,
    .gtior_setting.gtior_b.oadf   = (uint32_t) GPT_GTIOC_DISABLE_PROHIBITED,
    .gtior_setting.gtior_b.nfaen  = ((uint32_t) GPT_CAPTURE_FILTER_NONE & 1U),
    .gtior_setting.gtior_b.nfcsa  = ((uint32_t) GPT_CAPTURE_FILTER_NONE >> 1U),
    .gtior_setting.gtior_b.gtiob  = (0U << 4U) | (0U << 2U) | (0U << 0U),
    .gtior_setting.gtior_b.obdflt = (uint32_t) GPT_PIN_LEVEL_LOW,
    .gtior_setting.gtior_b.obhld  = 0U,
    .gtior_setting.gtior_b.obe    = (uint32_t) false,
    .gtior_setting.gtior_b.obdf   = (uint32_t) GPT_GTIOC_DISABLE_PROHIBITED,
    .gtior_setting.gtior_b.nfben  = ((uint32_t) GPT_CAPTURE_FILTER_NONE & 1U),
    .gtior_setting.gtior_b.nfcsb  = ((uint32_t) GPT_CAPTURE_FILTER_NONE >> 1U),
#else
          .gtior_setting.gtior = 0U,
#endif
        };
const timer_cfg_t g_timer0_cfg =
{ .mode = TIMER_MODE_PERIODIC,
/* Actual period: 0.001 seconds. Actual duty: 50%. */.period_counts = (uint32_t) 0x186a0,
  .duty_cycle_counts = 0xc350, .source_div = (timer_source_div_t) 0, .channel = 0, .p_callback = timer_1ms,
  /** If NULL then do not add & */
#if defined(NULL)
    .p_context           = NULL,
#else
  .p_context = &NULL,
#endif
  .p_extend = &g_timer0_extend,
  .cycle_end_ipl = (15),
#if defined(VECTOR_NUMBER_GPT0_COUNTER_OVERFLOW)
    .cycle_end_irq       = VECTOR_NUMBER_GPT0_COUNTER_OVERFLOW,
#else
  .cycle_end_irq = FSP_INVALID_VECTOR,
#endif
        };
/* Instance structure to use this module. */
const timer_instance_t g_timer0 =
{ .p_ctrl = &g_timer0_ctrl, .p_cfg = &g_timer0_cfg, .p_api = &g_timer_on_gpt };
dtc_instance_ctrl_t g_transfer1_ctrl;

transfer_info_t g_transfer1_info =
{ .transfer_settings_word_b.dest_addr_mode = TRANSFER_ADDR_MODE_INCREMENTED,
  .transfer_settings_word_b.repeat_area = TRANSFER_REPEAT_AREA_DESTINATION,
  .transfer_settings_word_b.irq = TRANSFER_IRQ_END,
  .transfer_settings_word_b.chain_mode = TRANSFER_CHAIN_MODE_DISABLED,
  .transfer_settings_word_b.src_addr_mode = TRANSFER_ADDR_MODE_FIXED,
  .transfer_settings_word_b.size = TRANSFER_SIZE_1_BYTE,
  .transfer_settings_word_b.mode = TRANSFER_MODE_NORMAL,
  .p_dest = (void*) NULL,
  .p_src = (void const*) NULL,
  .num_blocks = 0,
  .length = 0, };

const dtc_extended_cfg_t g_transfer1_cfg_extend =
{ .activation_source = VECTOR_NUMBER_SCI7_RXI, };
const transfer_cfg_t g_transfer1_cfg =
{ .p_info = &g_transfer1_info, .p_extend = &g_transfer1_cfg_extend, };

/* Instance structure to use this module. */
const transfer_instance_t g_transfer1 =
{ .p_ctrl = &g_transfer1_ctrl, .p_cfg = &g_transfer1_cfg, .p_api = &g_transfer_on_dtc };
dtc_instance_ctrl_t g_transfer0_ctrl;

transfer_info_t g_transfer0_info =
{ .transfer_settings_word_b.dest_addr_mode = TRANSFER_ADDR_MODE_FIXED,
  .transfer_settings_word_b.repeat_area = TRANSFER_REPEAT_AREA_SOURCE,
  .transfer_settings_word_b.irq = TRANSFER_IRQ_END,
  .transfer_settings_word_b.chain_mode = TRANSFER_CHAIN_MODE_DISABLED,
  .transfer_settings_word_b.src_addr_mode = TRANSFER_ADDR_MODE_INCREMENTED,
  .transfer_settings_word_b.size = TRANSFER_SIZE_1_BYTE,
  .transfer_settings_word_b.mode = TRANSFER_MODE_NORMAL,
  .p_dest = (void*) NULL,
  .p_src = (void const*) NULL,
  .num_blocks = 0,
  .length = 0, };

const dtc_extended_cfg_t g_transfer0_cfg_extend =
{ .activation_source = VECTOR_NUMBER_SCI7_TXI, };
const transfer_cfg_t g_transfer0_cfg =
{ .p_info = &g_transfer0_info, .p_extend = &g_transfer0_cfg_extend, };

/* Instance structure to use this module. */
const transfer_instance_t g_transfer0 =
{ .p_ctrl = &g_transfer0_ctrl, .p_cfg = &g_transfer0_cfg, .p_api = &g_transfer_on_dtc };
sci_uart_instance_ctrl_t g_uart0_ctrl;

baud_setting_t g_uart0_baud_setting =
        {
        /* Baud rate calculated with 0.091% error. */.semr_baudrate_bits_b.abcse = 0,
          .semr_baudrate_bits_b.abcs = 0, .semr_baudrate_bits_b.bgdm = 1, .cks = 0, .brr = 6, .mddr = (uint8_t) 132, .semr_baudrate_bits_b.brme =
                  true };

/** UART extended configuration for UARTonSCI HAL driver */
const sci_uart_extended_cfg_t g_uart0_cfg_extend =
{ .clock = SCI_UART_CLOCK_INT, .rx_edge_start = SCI_UART_START_BIT_FALLING_EDGE, .noise_cancel =
          SCI_UART_NOISE_CANCELLATION_DISABLE,
  .rx_fifo_trigger = SCI_UART_RX_FIFO_TRIGGER_MAX, .p_baud_setting = &g_uart0_baud_setting, .flow_control =
          SCI_UART_FLOW_CONTROL_RTS,
#if 0xFF != 0xFF
                .flow_control_pin       = BSP_IO_PORT_FF_PIN_0xFF,
                #else
  .flow_control_pin = (bsp_io_port_pin_t) UINT16_MAX,
#endif
  .rs485_setting =
  { .enable = SCI_UART_RS485_DISABLE, .polarity = SCI_UART_RS485_DE_POLARITY_HIGH,
#if 0xFF != 0xFF
                    .de_control_pin = BSP_IO_PORT_FF_PIN_0xFF,
                #else
    .de_control_pin = (bsp_io_port_pin_t) UINT16_MAX,
#endif
          }, };

/** UART interface configuration */
const uart_cfg_t g_uart0_cfg =
{ .channel = 7, .data_bits = UART_DATA_BITS_8, .parity = UART_PARITY_OFF, .stop_bits = UART_STOP_BITS_1, .p_callback =
          user_uart_callback,
  .p_context = NULL, .p_extend = &g_uart0_cfg_extend,
#define RA_NOT_DEFINED (1)
#if (RA_NOT_DEFINED == g_transfer0)
                .p_transfer_tx       = NULL,
#else
  .p_transfer_tx = &g_transfer0,
#endif
#if (RA_NOT_DEFINED == g_transfer1)
                .p_transfer_rx       = NULL,
#else
  .p_transfer_rx = &g_transfer1,
#endif
#undef RA_NOT_DEFINED
  .rxi_ipl = (12),
  .txi_ipl = (12), .tei_ipl = (12), .eri_ipl = (12),
#if defined(VECTOR_NUMBER_SCI7_RXI)
                .rxi_irq             = VECTOR_NUMBER_SCI7_RXI,
#else
  .rxi_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI7_TXI)
                .txi_irq             = VECTOR_NUMBER_SCI7_TXI,
#else
  .txi_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI7_TEI)
                .tei_irq             = VECTOR_NUMBER_SCI7_TEI,
#else
  .tei_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI7_ERI)
                .eri_irq             = VECTOR_NUMBER_SCI7_ERI,
#else
  .eri_irq = FSP_INVALID_VECTOR,
#endif
        };

/* Instance structure to use this module. */
const uart_instance_t g_uart0 =
{ .p_ctrl = &g_uart0_ctrl, .p_cfg = &g_uart0_cfg, .p_api = &g_uart_on_sci };
void g_hal_init(void)
{
    g_common_init ();
}