Lines Matching +full:high +full:- +full:frequency
8 // <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
13 // <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source
25 // <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED - Enables LF Clock Calibration Support
31 // <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority
46 // <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
51 // <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level
63 // <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix.
79 // <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
99 // <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
104 // <o> NRFX_COMP_CONFIG_REF - Reference voltage
116 // <o> NRFX_COMP_CONFIG_MAIN_MODE - Main mode
125 // <o> NRFX_COMP_CONFIG_SPEED_MODE - Speed mode
129 // <2=> High speed
135 // <o> NRFX_COMP_CONFIG_HYST - Hystheresis
144 // <o> NRFX_COMP_CONFIG_ISOURCE - Current Source
155 // <o> NRFX_COMP_CONFIG_INPUT - Analog input
170 // <o> NRFX_COMP_CONFIG_IRQ_PRIORITY - Interrupt priority
185 // <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
190 // <o> NRFX_COMP_CONFIG_LOG_LEVEL - Default Severity level
202 // <o> NRFX_COMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
218 // <o> NRFX_COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
238 // <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
243 // <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
248 // <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority
263 // <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
268 // <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level
280 // <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
296 // <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
316 // <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
321 // <o> NRFX_PDM_CONFIG_MODE - Mode
330 // <o> NRFX_PDM_CONFIG_EDGE - Edge
339 // <o> NRFX_PDM_CONFIG_CLOCK_FREQ - Clock frequency
349 // <o> NRFX_PDM_CONFIG_IRQ_PRIORITY - Interrupt priority
364 // <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
369 // <o> NRFX_PDM_CONFIG_LOG_LEVEL - Default Severity level
381 // <o> NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix.
397 // <o> NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
417 // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
422 // <o> NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority
437 // <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator
446 // <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulat…
457 // <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
462 // <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
467 // <o> NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level
479 // <o> NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
495 // <o> NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
515 // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
520 // <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module.
527 // <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module.
534 // <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module.
541 // <q> NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module.
548 // <q> NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module.
555 // <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
560 // <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level
572 // <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix.
588 // <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
608 // <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
613 // <q> NRFX_PWM0_ENABLED - Enable PWM0 instance
620 // <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
627 // <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31>
634 // <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31>
641 // <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31>
648 // <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock
663 // <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode
672 // <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
677 // <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode
688 // <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE - Step mode
697 // <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
712 // <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
717 // <o> NRFX_PWM_CONFIG_LOG_LEVEL - Default Severity level
729 // <o> NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix.
745 // <o> NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
765 // <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
770 // <o> NRFX_QDEC_CONFIG_REPORTPER - Report period
785 // <o> NRFX_QDEC_CONFIG_SAMPLEPER - Sample period
800 // <o> NRFX_QDEC_CONFIG_PIO_A - A pin <0-31>
807 // <o> NRFX_QDEC_CONFIG_PIO_B - B pin <0-31>
814 // <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin <0-31>
821 // <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
826 // <o> NRFX_QDEC_CONFIG_LEDPOL - LED polarity
829 // <1=> Active high
835 // <q> NRFX_QDEC_CONFIG_DBFEN - Debouncing enable
842 // <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable
849 // <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority
864 // <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
869 // <o> NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level
881 // <o> NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix.
897 // <o> NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
917 // <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
922 // <q> NRFX_RNG_CONFIG_ERROR_CORRECTION - Error correction
929 // <o> NRFX_RNG_CONFIG_IRQ_PRIORITY - Interrupt priority
944 // <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
949 // <o> NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level
961 // <o> NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix.
977 // <o> NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
997 // <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
1002 // <q> NRFX_RTC0_ENABLED - Enable RTC0 instance
1009 // <q> NRFX_RTC1_ENABLED - Enable RTC1 instance
1016 // <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
1021 // <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768>
1028 // <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering
1035 // <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1050 // <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
1055 // <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default Severity level
1067 // <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix.
1083 // <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1103 // <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
1108 // <o> NRFX_SAADC_CONFIG_RESOLUTION - Resolution
1119 // <o> NRFX_SAADC_CONFIG_OVERSAMPLE - Sample period
1135 // <q> NRFX_SAADC_CONFIG_LP_MODE - Enabling low power mode
1142 // <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority
1157 // <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
1162 // <o> NRFX_SAADC_CONFIG_LOG_LEVEL - Default Severity level
1174 // <o> NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix.
1190 // <o> NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1210 // <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
1215 // <q> NRFX_SPIM0_ENABLED - Enable SPIM0 instance
1222 // <o> NRFX_SPIM_MISO_PULL_CFG - MISO pin pull configuration.
1232 // <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1247 // <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
1252 // <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level
1264 // <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
1280 // <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1300 // <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
1305 // <q> NRFX_SPIS0_ENABLED - Enable SPIS0 instance
1312 // <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1327 // <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255>
1334 // <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255>
1341 // <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
1346 // <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level
1358 // <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
1374 // <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1394 // <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
1399 // <q> NRFX_EGU_ENABLED - Enable EGU support
1406 // <q> NRFX_SWI0_DISABLED - Exclude SWI0 from being utilized by the driver
1413 // <q> NRFX_SWI1_DISABLED - Exclude SWI1 from being utilized by the driver
1420 // <q> NRFX_SWI2_DISABLED - Exclude SWI2 from being utilized by the driver
1427 // <q> NRFX_SWI3_DISABLED - Exclude SWI3 from being utilized by the driver
1434 // <q> NRFX_SWI4_DISABLED - Exclude SWI4 from being utilized by the driver
1441 // <q> NRFX_SWI5_DISABLED - Exclude SWI5 from being utilized by the driver
1448 // <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
1453 // <o> NRFX_SWI_CONFIG_LOG_LEVEL - Default Severity level
1465 // <o> NRFX_SWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
1481 // <o> NRFX_SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1501 // <q> NRFX_SYSTICK_ENABLED - nrfx_systick - ARM(R) SysTick driver
1508 // <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
1513 // <q> NRFX_TIMER0_ENABLED - Enable TIMER0 instance
1520 // <q> NRFX_TIMER1_ENABLED - Enable TIMER1 instance
1527 // <q> NRFX_TIMER2_ENABLED - Enable TIMER2 instance
1534 // <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode
1551 // <o> NRFX_TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation
1560 // <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width
1571 // <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1586 // <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
1591 // <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default Severity level
1603 // <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
1619 // <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1639 // <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
1644 // <q> NRFX_TWIM0_ENABLED - Enable TWIM0 instance
1651 // <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY - Frequency
1661 // <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit
1668 // <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1683 // <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
1688 // <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default Severity level
1700 // <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
1716 // <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1736 // <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
1741 // <q> NRFX_TWIS0_ENABLED - Enable TWIS0 instance
1748 // <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only…
1751 …ould be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 w…
1757 // <q> NRFX_TWIS_NO_SYNC_MODE - Remove support for synchronous mode
1766 // <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
1771 // <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
1776 // <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration
1786 // <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration
1796 // <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1811 // <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
1816 // <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default Severity level
1828 // <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
1844 // <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1864 // <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
1869 // <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
1874 // <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control
1883 // <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity
1892 // <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
1917 // <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1932 // <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
1937 // <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level
1949 // <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
1965 // <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1985 // <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
1990 // <o> NRFX_WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode
2001 // <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295>
2008 // <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver
2017 // <o> NRFX_WDT_CONFIG_IRQ_PRIORITY - Interrupt priority
2032 // <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
2037 // <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default Severity level
2049 // <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix.
2065 // <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.