Lines Matching +full:high +full:- +full:frequency
8 // <e> NRFX_ADC_ENABLED - nrfx_adc - ADC peripheral driver
13 // <o> NRFX_ADC_CONFIG_IRQ_PRIORITY - Interrupt priority
24 // <e> NRFX_ADC_CONFIG_LOG_ENABLED - Enables logging in the module.
29 // <o> NRFX_ADC_CONFIG_LOG_LEVEL - Default Severity level
41 // <o> NRFX_ADC_CONFIG_INFO_COLOR - ANSI escape code prefix.
57 // <o> NRFX_ADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
77 // <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
82 // <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source
92 // <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED - Enables LF Clock Calibration Support
98 // <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority
109 // <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
114 // <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level
126 // <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix.
142 // <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
162 // <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
167 // <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
172 // <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority
183 // <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
188 // <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level
200 // <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
216 // <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
236 // <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
241 // <o> NRFX_LPCOMP_CONFIG_REFERENCE - Reference voltage
265 // <o> NRFX_LPCOMP_CONFIG_DETECTION - Detection
275 // <o> NRFX_LPCOMP_CONFIG_INPUT - Analog input
290 // <q> NRFX_LPCOMP_CONFIG_HYST - Hysteresis
297 // <o> NRFX_LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority
308 // <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
313 // <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL - Default Severity level
325 // <o> NRFX_LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
341 // <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
361 // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
366 // <o> NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority
377 // <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator
386 // <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulat…
397 // <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
402 // <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
407 // <o> NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level
419 // <o> NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
435 // <o> NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
455 // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
460 // <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module.
467 // <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module.
474 // <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
479 // <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level
491 // <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix.
507 // <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
527 // <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
532 // <o> NRFX_QDEC_CONFIG_REPORTPER - Report period
547 // <o> NRFX_QDEC_CONFIG_SAMPLEPER - Sample period
562 // <o> NRFX_QDEC_CONFIG_PIO_A - A pin <0-31>
569 // <o> NRFX_QDEC_CONFIG_PIO_B - B pin <0-31>
576 // <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin <0-31>
583 // <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
588 // <o> NRFX_QDEC_CONFIG_LEDPOL - LED polarity
591 // <1=> Active high
597 // <q> NRFX_QDEC_CONFIG_DBFEN - Debouncing enable
604 // <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable
611 // <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority
622 // <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
627 // <o> NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level
639 // <o> NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix.
655 // <o> NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
675 // <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
680 // <q> NRFX_RNG_CONFIG_ERROR_CORRECTION - Error correction
687 // <o> NRFX_RNG_CONFIG_IRQ_PRIORITY - Interrupt priority
698 // <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
703 // <o> NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level
715 // <o> NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix.
731 // <o> NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
751 // <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
756 // <q> NRFX_RTC0_ENABLED - Enable RTC0 instance
763 // <q> NRFX_RTC1_ENABLED - Enable RTC1 instance
770 // <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
775 // <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768>
782 // <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering
789 // <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
800 // <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
805 // <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default Severity level
817 // <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix.
833 // <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
853 // <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
858 // <q> NRFX_SPIS1_ENABLED - Enable SPIS1 instance
865 // <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
876 // <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255>
883 // <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255>
890 // <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
895 // <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level
907 // <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
923 // <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
943 // <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
948 // <q> NRFX_SPI0_ENABLED - Enable SPI0 instance
955 // <q> NRFX_SPI1_ENABLED - Enable SPI1 instance
962 // <o> NRFX_SPI_MISO_PULL_CFG - MISO pin pull configuration.
972 // <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
983 // <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
988 // <o> NRFX_SPI_CONFIG_LOG_LEVEL - Default Severity level
1000 // <o> NRFX_SPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
1016 // <o> NRFX_SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1036 // <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
1041 // <q> NRFX_SWI0_DISABLED - Exclude SWI0 from being utilized by the driver
1048 // <q> NRFX_SWI1_DISABLED - Exclude SWI1 from being utilized by the driver
1055 // <q> NRFX_SWI2_DISABLED - Exclude SWI2 from being utilized by the driver
1062 // <q> NRFX_SWI3_DISABLED - Exclude SWI3 from being utilized by the driver
1069 // <q> NRFX_SWI4_DISABLED - Exclude SWI4 from being utilized by the driver
1076 // <q> NRFX_SWI5_DISABLED - Exclude SWI5 from being utilized by the driver
1083 // <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
1088 // <o> NRFX_SWI_CONFIG_LOG_LEVEL - Default Severity level
1100 // <o> NRFX_SWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
1116 // <o> NRFX_SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1136 // <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
1141 // <q> NRFX_TIMER0_ENABLED - Enable TIMER0 instance
1148 // <q> NRFX_TIMER1_ENABLED - Enable TIMER1 instance
1155 // <q> NRFX_TIMER2_ENABLED - Enable TIMER2 instance
1162 // <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode
1179 // <o> NRFX_TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation
1188 // <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width
1199 // <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1210 // <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
1215 // <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default Severity level
1227 // <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
1243 // <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1263 // <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
1268 // <q> NRFX_TWI0_ENABLED - Enable TWI0 instance
1275 // <q> NRFX_TWI1_ENABLED - Enable TWI1 instance
1282 // <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY - Frequency
1292 // <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit
1299 // <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1310 // <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
1315 // <o> NRFX_TWI_CONFIG_LOG_LEVEL - Default Severity level
1327 // <o> NRFX_TWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
1343 // <o> NRFX_TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1363 // <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
1368 // <o> NRFX_UART0_ENABLED - Enable UART0 instance
1373 // <o> NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control
1382 // <o> NRFX_UART_DEFAULT_CONFIG_PARITY - Parity
1391 // <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
1416 // <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
1427 // <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
1432 // <o> NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level
1444 // <o> NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
1460 // <o> NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
1480 // <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
1485 // <o> NRFX_WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode
1496 // <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295>
1503 // <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver
1512 // <o> NRFX_WDT_CONFIG_IRQ_PRIORITY - Interrupt priority
1523 // <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
1528 // <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default Severity level
1540 // <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix.
1556 // <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.