Lines Matching +full:high +full:- +full:frequency

3 Copyright (c) 2010 - 2018, Nordic Semiconductor ASA All rights reserved.
399 /* Description: High frequency clock status. */
423 /* Description: Low frequency clock status. */
466 /* Description: Crystal frequency. */
468 /* Bits 7..0 : External Xtal frequency selection. */
526 /* Description: Pre-programmed factory code present. */
528 /* Bits 7..0 : Pre-programmed factory code present. */
537 /* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */
580 #define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */
586 #define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */
592 #define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */
598 #define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */
604 #define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */
610 #define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */
616 #define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */
622 #define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */
628 #define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */
634 #define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */
640 #define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */
646 #define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */
652 #define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */
658 #define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */
664 #define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */
670 #define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */
676 #define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */
682 #define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */
688 #define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */
694 #define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */
700 #define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */
706 #define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */
712 #define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */
718 #define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */
724 #define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */
730 #define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */
736 #define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */
742 #define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */
748 #define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */
754 #define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */
760 #define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */
766 #define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */
775 #define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */
776 #define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */
782 #define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */
783 #define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */
789 #define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */
790 #define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */
796 #define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */
797 #define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */
803 #define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */
804 #define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */
810 #define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */
811 #define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */
817 #define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */
818 #define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */
824 #define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */
825 #define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */
831 #define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */
832 #define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */
838 #define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */
839 #define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */
845 #define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */
846 #define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */
852 #define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */
853 #define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */
859 #define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */
860 #define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */
866 #define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */
867 #define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */
873 #define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */
874 #define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */
880 #define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */
881 #define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */
887 #define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */
888 #define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */
894 #define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */
895 #define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */
901 #define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */
902 #define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */
908 #define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */
909 #define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */
915 #define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */
916 #define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */
922 #define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */
923 #define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */
929 #define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */
930 #define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */
936 #define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */
937 #define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */
943 #define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */
944 #define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */
950 #define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */
951 #define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */
957 #define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */
958 #define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */
964 #define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */
965 #define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */
971 #define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */
972 #define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */
978 #define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */
979 #define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */
985 #define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */
986 #define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */
992 #define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */
993 #define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */
1002 #define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */
1009 #define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */
1016 #define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */
1023 #define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */
1030 #define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */
1037 #define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */
1044 #define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */
1051 #define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */
1058 #define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */
1065 #define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */
1072 #define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */
1079 #define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */
1086 #define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */
1093 #define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */
1100 #define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */
1107 #define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */
1114 #define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */
1121 #define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */
1128 #define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */
1135 #define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */
1142 #define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */
1149 #define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */
1156 #define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */
1163 #define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */
1170 #define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */
1177 #define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */
1184 #define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */
1191 #define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */
1198 #define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */
1205 #define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */
1212 #define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */
1219 #define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */
1229 #define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */
1235 #define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */
1241 #define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */
1247 #define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */
1253 #define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */
1259 #define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */
1265 #define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */
1271 #define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */
1277 #define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */
1283 #define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */
1289 #define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */
1295 #define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */
1301 #define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */
1307 #define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */
1313 #define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */
1319 #define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */
1325 #define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */
1331 #define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */
1337 #define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */
1343 #define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */
1349 #define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */
1355 #define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */
1361 #define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */
1367 #define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */
1373 #define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */
1379 #define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */
1385 #define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */
1391 #define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */
1397 #define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */
1403 #define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */
1409 #define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */
1415 #define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */
2073 #define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */
2080 #define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */
2081 #define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */
2082 #define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */
2084 #define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */
2086 #define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */
2088 /* Bits 3..2 : Pull-up or -down configuration. */
2194 #define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */
2200 #define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */
2201 #define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */
3013 #define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */
3027 /* Description: Register for erasing all non-volatile user memory. */
3071 /* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */
3077 /* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */
3083 /* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */
3089 /* Bit 3 : Reset from CPU lock-up detected. */
3107 /* Bit 0 : Reset from pin-reset detected. */
3245 /* Description: DCDC power-up force register. */
3247 /* Bit 1 : DCDC power-up force on. */
3253 /* Bit 0 : DCDC power-up force off. */
4086 #define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */
4382 /* Description: Frequency. */
4384 /* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decisi…
4385 #define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
4386 …QUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
4396 #define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */
4397 #define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */
4398 #define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */
4399 #define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */
4400 #define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */
4401 #define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */
4608 … result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */
5064 /* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when …
5134 /* Description: SPI frequency */
5137 #define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
5138 …CY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
5153 #define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
5309 #define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
5332 /* Description: Over-read character. */
5334 /* Bits 7..0 : Over-read character. */
5512 #define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */
5513 #define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */
5514 #define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */
5515 #define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */
5518 /* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is …
5535 /* Description: Two-wire interface master 0. */
5643 /* Description: Two-wire error source. Write error field to 1 to clear error. */
5667 /* Description: Enable two-wire master. */
5690 /* Description: Two-wire frequency. */
5692 /* Bits 31..0 : Two-wire master clock frequency. */
5693 #define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
5694 …CY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
5700 /* Description: Address used in the two-wire transfer. */
5702 /* Bits 6..0 : Two-wire address. */
5940 /* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present…
6130 /*lint --flb "Leave library region" */