Lines Matching full:set
229 NRF_POWER_POFTHR_V21 = POWER_POFCON_THRESHOLD_V21, /**< Set threshold to 2.1 V */
230 NRF_POWER_POFTHR_V23 = POWER_POFCON_THRESHOLD_V23, /**< Set threshold to 2.3 V */
231 NRF_POWER_POFTHR_V25 = POWER_POFCON_THRESHOLD_V25, /**< Set threshold to 2.5 V */
232 NRF_POWER_POFTHR_V27 = POWER_POFCON_THRESHOLD_V27, /**< Set threshold to 2.7 V */
234 NRF_POWER_POFTHR_V17 = POWER_POFCON_THRESHOLD_V17, /**< Set threshold to 1.7 V */
235 NRF_POWER_POFTHR_V18 = POWER_POFCON_THRESHOLD_V18, /**< Set threshold to 1.8 V */
236 NRF_POWER_POFTHR_V19 = POWER_POFCON_THRESHOLD_V19, /**< Set threshold to 1.9 V */
237 NRF_POWER_POFTHR_V20 = POWER_POFCON_THRESHOLD_V20, /**< Set threshold to 2.0 V */
238 NRF_POWER_POFTHR_V22 = POWER_POFCON_THRESHOLD_V22, /**< Set threshold to 2.2 V */
239 NRF_POWER_POFTHR_V24 = POWER_POFCON_THRESHOLD_V24, /**< Set threshold to 2.4 V */
240 NRF_POWER_POFTHR_V26 = POWER_POFCON_THRESHOLD_V26, /**< Set threshold to 2.6 V */
241 NRF_POWER_POFTHR_V28 = POWER_POFCON_THRESHOLD_V28, /**< Set threshold to 2.8 V */
250 NRF_POWER_POFTHRVDDH_V27 = POWER_POFCON_THRESHOLDVDDH_V27, /**< Set threshold to 2.7 V */
251 NRF_POWER_POFTHRVDDH_V28 = POWER_POFCON_THRESHOLDVDDH_V28, /**< Set threshold to 2.8 V */
252 NRF_POWER_POFTHRVDDH_V29 = POWER_POFCON_THRESHOLDVDDH_V29, /**< Set threshold to 2.9 V */
253 NRF_POWER_POFTHRVDDH_V30 = POWER_POFCON_THRESHOLDVDDH_V30, /**< Set threshold to 3.0 V */
254 NRF_POWER_POFTHRVDDH_V31 = POWER_POFCON_THRESHOLDVDDH_V31, /**< Set threshold to 3.1 V */
255 NRF_POWER_POFTHRVDDH_V32 = POWER_POFCON_THRESHOLDVDDH_V32, /**< Set threshold to 3.2 V */
256 NRF_POWER_POFTHRVDDH_V33 = POWER_POFCON_THRESHOLDVDDH_V33, /**< Set threshold to 3.3 V */
257 NRF_POWER_POFTHRVDDH_V34 = POWER_POFCON_THRESHOLDVDDH_V34, /**< Set threshold to 3.4 V */
258 NRF_POWER_POFTHRVDDH_V35 = POWER_POFCON_THRESHOLDVDDH_V35, /**< Set threshold to 3.5 V */
259 NRF_POWER_POFTHRVDDH_V36 = POWER_POFCON_THRESHOLDVDDH_V36, /**< Set threshold to 3.6 V */
260 NRF_POWER_POFTHRVDDH_V37 = POWER_POFCON_THRESHOLDVDDH_V37, /**< Set threshold to 3.7 V */
261 NRF_POWER_POFTHRVDDH_V38 = POWER_POFCON_THRESHOLDVDDH_V38, /**< Set threshold to 3.8 V */
262 NRF_POWER_POFTHRVDDH_V39 = POWER_POFCON_THRESHOLDVDDH_V39, /**< Set threshold to 3.9 V */
263 NRF_POWER_POFTHRVDDH_V40 = POWER_POFCON_THRESHOLDVDDH_V40, /**< Set threshold to 4.0 V */
264 NRF_POWER_POFTHRVDDH_V41 = POWER_POFCON_THRESHOLDVDDH_V41, /**< Set threshold to 4.1 V */
265 NRF_POWER_POFTHRVDDH_V42 = POWER_POFCON_THRESHOLDVDDH_V42, /**< Set threshold to 4.2 V */
391 * @retval true If the event is set.
392 * @retval false If the event is not set.
403 * @retval true If the event was set.
404 * @retval false If the event was not set.
453 * @param[in] task Task for which to set the configuration.
471 * @param[in] event Event for which to set the configuration.
545 * @brief Set power failure comparator configuration
549 * @param[in] enabled Set to true if power failure comparator should be enabled.
550 * @param[in] thr Set the voltage threshold value.
554 * clear it settings (set to the lowest voltage).
555 * Use @ref nrf_power_pofcon_vddh_set function to set new value.
564 * @param[out] p_enabled Function would set this boolean variable to true
575 * @brief Set VDDH power failure comparator threshold
577 * @param[in] thr Threshold to be set
590 * @brief Set general purpose retention register
592 * @param[in] val Value to be set in the register
605 * @brief Set general purpose retention register 2
609 * @param[in] val Value to be set in the register
636 * @param[in] val Value to be set in the register
649 * @param[in] enable Set true to enable or false to disable DCDC converter.
709 * @param[in] enable Set true to enable or false to disable DCDC converter.