Lines Matching full:sequence

108     nrf_pwm_dec_load_t load_mode;    ///< Mode of loading sequence data from RAM.
109     nrf_pwm_dec_step_t step_mode;    ///< Mode of advancing the active sequence.
138                                     the last value of the final sequence is
162                                                from sequence 0 is loaded. */
165                                                from sequence 1 is loaded. */
184     NRFX_PWM_EVT_FINISHED, ///< Sequence playback finished.
185     NRFX_PWM_EVT_END_SEQ0, /**< End of sequence 0 reached. Its data can be
187     NRFX_PWM_EVT_END_SEQ1, /**< End of sequence 1 reached. Its data can be
218  * If any sequence playback is in progress, it is stopped immediately.
225  * @brief Function for starting a single sequence playback.
228  * sequences must be used (single sequence can be played back only once by
229  * the peripheral). Therefore, the provided sequence is internally set and
230  * played back as both sequence 0 and sequence 1. Consequently, if end of
231  * sequence notifications are required, events for both sequences should be
242  * @note The array containing the duty cycle values for the specified sequence
247  * @param[in] p_sequence     Sequence to be played back.
262  * @brief Function for starting a two-sequence playback.
269  * @note The array containing the duty cycle values for the specified sequence
274  * @param[in] p_sequence_0   First sequence to be played back.
275  * @param[in] p_sequence_1   Second sequence to be played back.
291  * @brief Function for advancing the active sequence.
300  * @brief Function for stopping the sequence playback.
303  * This means that if the active sequence is configured to repeat each duty
336  * @brief Function for updating the sequence data during playback.
339  * @param[in] seq_id     Identifier of the sequence (0 or 1).
340  * @param[in] p_sequence Pointer to the new sequence definition.
349  *        in the specified sequence during playback.
352  * @param[in] seq_id     Identifier of the sequence (0 or 1).
361  *        in the specified sequence during playback.
364  * @param[in] seq_id     Identifier of the sequence (0 or 1).
373  *        in specified sequence during playback.
376  * @param[in] seq_id     Identifier of the sequence (0 or 1).
385  *        sequence during playback.
388  * @param[in] seq_id     Identifier of the sequence (0 or 1).