Lines Matching full:to
19 Say Y or M if you want to add support for codecs attached to the
20 Tegra20 AC97 interface. You will also need to select the individual
21 machine drivers to support below.
26 Say Y or M if you want to add support for the Tegra20 DAS module.
27 You will also need to select the individual machine drivers to
34 Say Y or M if you want to add support for codecs attached to the
35 Tegra20 I2S interface. You will also need to select the individual
36 machine drivers to support below.
41 Say Y or M if you want to add support for the Tegra20 SPDIF interface.
42 You will also need to select the individual machine drivers to support
48 Say Y or M if you want to add support for the Tegra30 AHUB module.
49 You will also need to select the individual machine drivers to
56 Say Y or M if you want to add support for codecs attached to the
57 Tegra30 I2S interface. You will also need to select the individual
58 machine drivers to support below.
63 Config to enable Audio Hub (AHUB) module, which comprises of a
64 switch called Audio Crossbar (AXBAR) used to configure or modify
67 Say Y or M if you want to add support for Tegra210 AHUB module.
72 Config to enable the Digital MIC (DMIC) controller which is used
73 to interface with Pulse Density Modulation (PDM) input devices.
74 The DMIC controller implements a converter to convert PDM signals
75 to Pulse Code Modulation (PCM) signals. This can be viewed as a
77 Say Y or M if you want to add support for Tegra210 DMIC module.
83 Config to enable the Inter-IC Sound (I2S) Controller which
85 point-to-point serial interfaces. It can interface with I2S
87 Say Y or M if you want to add support for Tegra210 I2S module.
92 Config to enable the Output Processing Engine (OPE) which includes
94 (MBDRC) sub blocks for data processing. It can support up to 8
96 Say Y or M if you want to add support for Tegra210 OPE module.
101 Config to enable the Asynchronous Sample Rate Converter (ASRC),
103 one frequency to another. It can handle over a wide range of
104 sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
108 Say Y or M if you want to add support for Tegra186 ASRC module.
113 Config to enable the Digital Speaker Controller (DSPK) which
114 converts the multi-bit Pulse Code Modulation (PCM) audio input to
117 that up-samples the input to the desired sampling rate by
118 interpolation and then converts the oversampled PCM input to
120 Say Y or M if you want to add support for Tegra186 DSPK module.
125 Config to enable ADMAIF which is the interface between ADMA and
126 Audio Hub (AHUB). Each ADMA channel that sends/receives data to/
128 sending data to AHUB pairs with an ADMAIF Tx channel, where as
131 Say Y or M if you want to add support for Tegra210 ADMAIF module.
136 Config to enable the digital Master Volume Controller (MVC) which
137 provides gain or attenuation to a digital signal path. It can be
140 Say Y or M if you want to add support for Tegra210 MVC module.
145 Config to enable the Sampling Frequency Converter (SFC) which
146 converts the sampling frequency of input signal to another
148 up to 2 channels (stereo).
149 Say Y or M if you want to add support for Tegra210 SFC module.
154 Config to enable the Audio Multiplexer (AMX) which can multiplex
155 four input streams (each of up to 16 channels) and generate
156 output stream (of up to 16 channels). A byte RAM helps to form an
158 Say Y or M if you want to add support for Tegra210 AMX module.
163 Config to enable the Audio Demultiplexer (ADX) which takes an
164 input stream (up to 16 channels) and demultiplexes it into four
165 output streams (each of up to 16 channels). A byte RAM helps to
167 frame. Its design is identical to that of byte RAM in the AMX
169 Say Y or M if you want to add support for Tegra210 ADX module.
174 Config to enable the Mixer module which can help to mix multiple
175 audio streams. It supports mixing of up to 10 input streams,
179 Say Y or M if you want to add support for Tegra210 Mixer module.
185 Config to enable Tegra audio machine driver based on generic
186 audio graph driver. It is a thin driver written to customize
199 Say Y or M here if you want to add support for SoC audio on Tegra
208 Say Y or M here if you want to add support for SoC audio on Tegra
217 Say Y or M here if you want to add support for SoC audio on Tegra
226 Say Y or M here if you want to add support for SoC audio on Tegra
237 Say Y or M here if you want to add support for SoC audio on Tegra
246 Say Y or M here if you want to add support for SoC audio on the
255 Say Y or M here if you want to add support for SoC audio on the
264 Say Y or M here if you want to add support for SoC audio on Tegra
273 Say Y or M here if you want to add support for SoC audio on Tegra
282 Say Y or M here if you want to add support for SoC audio on Tegra
291 Say Y or M here if you want to add support for SoC audio on Tegra