634 	lcr = serial_in(up, UART_LCR);  in serial_omap_set_mctrl()
635 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_mctrl()
641 	serial_out(up, UART_LCR, lcr);  in serial_omap_set_mctrl()
655 	serial_out(up, UART_LCR, up->lcr);  in serial_omap_break_ctl()
703 	serial_out(up, UART_LCR, UART_LCR_WLEN8);  in serial_omap_startup()
753 	serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);  in serial_omap_shutdown()
860 	serial_out(up, UART_LCR, cval);		/* reset DLAB */  in serial_omap_set_termios()
870 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
873 	serial_out(up, UART_LCR, 0);  in serial_omap_set_termios()
875 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
881 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
906 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
911 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
913 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
915 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
924 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
927 	serial_out(up, UART_LCR, 0);  in serial_omap_set_termios()
929 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
934 	serial_out(up, UART_LCR, 0);  in serial_omap_set_termios()
936 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
939 	serial_out(up, UART_LCR, cval);  in serial_omap_set_termios()
952 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
960 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
1010 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1012 	serial_out(up, UART_LCR, up->lcr);  in serial_omap_set_termios()
1029 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_pm()
1032 	serial_out(up, UART_LCR, 0);  in serial_omap_pm()
1035 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_pm()
1037 	serial_out(up, UART_LCR, 0);  in serial_omap_pm()
1713 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */  in serial_omap_restore_context()
1715 	serial_out(up, UART_LCR, 0x0); /* Operational mode */  in serial_omap_restore_context()
1717 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */  in serial_omap_restore_context()
1720 	serial_out(up, UART_LCR, 0x0); /* Operational mode */  in serial_omap_restore_context()
1723 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_restore_context()
1725 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */  in serial_omap_restore_context()
1728 	serial_out(up, UART_LCR, up->lcr);  in serial_omap_restore_context()