Lines Matching +full:esp32s3 +full:- +full:uart
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
26 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
53 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
129 bool "AT91 on-chip serial port support"
136 This enables the driver for the on-chip UARTs of the Atmel
145 Say Y here if you wish to use an on-chip UART on a Atmel
180 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
206 This enables the driver for the on-chip UARTs of the Amlogic
215 Say Y here if you wish to use a Amlogic MesonX UART as the
226 This enables the driver for the on-chip UARTs of the Cirrus
244 Support for the on-chip UARTs on the Samsung
256 Select the number of available UART ports for the Samsung S3C
265 Allow selection of the S3C24XX on-board serial ports for use as
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
287 tristate "NVIDIA Tegra Combined UART"
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
314 This selects support for an advanced UART from Maxim.
326 This selects support for an advanced UART from Maxim (Dallas).
329 that can be controlled through I2C or high-speed SPI.
339 DZ11-family serial controllers for DECstations and VAXstations,
686 bool "Enable LPC32XX high speed UART serial console"
747 the pmac_zilog and 8250 drivers to co-exist, but may cause
749 access the built-in serial ports on powermacs will need to
754 unable to use the 8250 module for PCMCIA or other 16C550-style
782 Say Y here if you wish to use a SCC or SMC CPM UART as the system
886 box, for instance in order to become a dial-in server. This driver
895 tristate "MSM on-chip serial port support"
906 tristate "QCOM on-chip GENI based serial port support"
921 bool "VIA VT8500 on-chip serial port support"
939 with the omap-serial driver. DMA support can be enabled from platform
958 tristate "SiFive UART support"
964 contains a SiFive UART IP block. This type of UART is present on
968 bool "Console on SiFive UART"
974 Select this option if you would like to use a SiFive UART as the
989 Support for UART on Lantiq and Intel SoCs.
994 bool "Console on Lantiq UART"
999 Select this option if you would like to use a Lantiq UART as the
1015 This selects support for an advanced UART from NXP (Philips).
1027 tristate "NXP SC16IS7xx UART support"
1054 tristate "Support for timberdale UART"
1058 Add support for UART controller on timberdale.
1061 tristate "Broadcom BCM63xx/BCM33xx UART support"
1066 This enables the driver for the onchip UART core found on
1072 BCM7xxx (STB) - DOCSIS console
1098 tristate "Altera JTAG UART support"
1101 This driver supports the Altera JTAG UART port.
1104 bool "Altera JTAG UART console support"
1109 Enable a Altera JTAG UART port to be the system console.
1120 tristate "Altera UART support"
1123 This driver supports the Altera softcore UART port.
1126 int "Maximum number of Altera UART ports"
1131 UART ports. The usual default varies from board to board, and
1135 int "Default baudrate for Altera UART ports"
1140 Altera UART ports. The usual default varies from board to board,
1144 bool "Altera UART console support"
1149 Enable a Altera UART port to be the system console.
1152 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1156 This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1158 Enabling PCH_DMA, this PCH UART works as DMA mode.
1162 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1168 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1172 Say Y here if you wish to use the PCH UART as the system console
1183 UART (AUART) port.
1193 tristate "Cadence (Xilinx Zynq) UART support"
1197 This driver supports the Cadence UART. It is found e.g. in Xilinx
1201 bool "Cadence UART console support"
1206 Enable a Cadence UART port to be the system console.
1215 built-in UART of the SoC, say Y to this option.
1225 Enable a built-in UART port of the AR933X to be the system console.
1236 bool "MPS2 UART console support"
1242 bool "MPS2 UART port"
1246 This driver support the UART ports on ARM MPS2.
1249 tristate "ARC UART driver support"
1252 Driver for on-chip UART for ARC(Synopsys) for the legacy
1256 bool "Console on ARC UART"
1261 Enable system Console on ARC UART
1264 int "Number of ARC UART ports"
1301 Support for the on-chip lpuart on some Freescale SOCs.
1313 tristate "Freescale LINFlexD UART serial port support"
1317 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1320 bool "Console on Freescale LINFlexD UART serial port"
1325 If you have enabled the LINFlexD UART serial port on the Freescale
1333 Support for the on-chip USART on Conexant Digicolor SoCs.
1348 This driver is for the on-chip Asynchronous Serial Controller on
1365 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1379 bool "Spreadtrum UART console support"
1395 This driver is for the on-chip Serial Controller on
1414 This driver is for Marvell EBU SoC's UART. If you have a machine
1415 based on the Armada-3700 SoC and wish to use the on-board serial
1427 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1437 This driver is for Actions Semiconductor S500/S900 SoC's UART.
1438 Say 'Y' here if you wish to use the on-board serial port.
1448 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1456 This driver is for RDA8810PL SoC's UART.
1457 Say 'Y' here if you wish to use the on-board serial port.
1467 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1471 tristate "Milbeaut USIO/UART serial port support"
1476 This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
1479 int "Maximum number of CSIO/UART ports (1-8)"
1485 bool "Support for console on MILBEAUT USIO/UART serial port"
1491 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
1503 This driver is for the FPGA-based LiteUART serial controller from LiteX
1523 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1530 tristate "Sunplus UART support"
1539 called sunplus-uart.
1542 bool "Console on Sunplus UART"
1547 Select this option if you would like to use a Sunplus UART as the
1555 tristate "Nuvoton MA35D1 family UART support"
1559 This driver supports Nuvoton MA35D1 family UART ports. If you would
1566 bool "Console on a Nuvotn MA35D1 family UART port"
1570 Select this options if you'd like to use the UART port0 of the
1578 tristate "Espressif ESP32 UART support"
1584 Driver for the UART controllers of the Espressif ESP32xx SoCs.
1597 Driver for the CDC ACM gadget controller of the Espressif ESP32S3