Lines Matching full:this
23 (half duplex), SSP, SSI, and PSP. This driver framework should
54 Enable this option if you want to enable the SPI memory extension.
55 This extension is meant to simplify interaction with SPI memories
66 This enables support for SPI-NAND mode on the Airoha NAND
67 Flash Interface found on Airoha ARM SoCs. This controller
75 This is the driver for the Altera SPI Controller.
88 This is a Device Feature List (DFL) bus driver for the
96 This enables master mode support for the SPIFC (SPI flash
103 This enables support for the SPI controller present on
114 This enables support for the SPI controller present on the
122 This enables support for the SPI controller present on the
129 This enables support for the SPI controller present on the
137 This enables support for the Firmware Memory controller (FMC)
148 This selects a driver for the Atmel SPI Controller, present on
156 This selects a driver for the AT91 USART Controller as SPI Master,
164 This enables support for the Quad SPI controller in master mode.
165 This driver does not support generic SPI. The implementation only
173 If you say yes to this option, support will be included for the
180 This enables support for the Analog Devices AXI SPI Engine SPI controller.
189 This selects a driver for the Broadcom BCM2835 SPI master.
192 "universal SPI master", and the regular SPI controller. This driver
200 This selects a driver for the Broadcom BCM2835 SPI aux master.
204 This driver is for the universal/auxiliary SPI controller.
216 This enables support for the High Speed SPI controller present on
226 Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
227 based platforms. This driver works for both SPI master for SPI NOR
234 This enables support for the High Speed SPI controller present on
243 Select this to get SPI support through I/O pins (GPIO, parallel
245 this code to manage the per-word or per-transfer accesses to the
248 This is library code, and is automatically selected by drivers that
249 need it. You only need to select this explicitly to support driver
250 modules that aren't part of this kernel tree.
257 This uses a custom parallel port cable to connect to an AVR
260 This same cable can be used to flash new firmware.
265 This selects the Cadence SPI controller master driver
275 Flash over 1/2/4-bit wide bus. Enable this option if you have a
287 Flash over up to 8-bit wide bus. Enable this option if you have a
301 This enables dedicated general purpose SPI/Microwire1-compatible
308 This enables support for the Coldfire QSPI controller in master
316 This enables support for the SPI controller inside the Cirrus Logic
370 in this driver).
378 If you say yes to this option, support will be included for Diolan
381 This driver can also be built as a module. If so, the module
388 This enables using the Cirrus EP93xx SPI controller in master
396 emulation that is designed for serial flash access. This driver
404 This enables support for the driver for FSI bus attached SPI
411 This enables Freescale i.MX LPSPI controllers in master mode.
418 This enables support for the Quad SPI controller in master mode.
421 This controller does not support generic SPI messages. It only
428 This enables support for the driver for GXP bus attached SPI
435 This enables support for HiSilicon SPI controller found on
438 This driver can also be built as a module. If so, the module
446 This enables support for HiSilicon v3xx SPI NOR flash controller
454 This enables support for the Flex SPI controller in master mode.
457 This controller does not support generic SPI messages and only
465 This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
467 slaves connected to a bus using this driver are configured as usual,
469 for the chipselect used by this controller driver.
471 Note that this driver often won't achieve even 1 Mbit/sec speeds,
474 speed with a custom version of this driver; see the source code.
480 This enables support for the SPFI master controller found on
487 This enables support for the Freescale i.MX SPI controllers.
493 This enables support for the Ingenic SoCs SPI controller.
495 To compile this driver as a module, choose M here: the module
508 This enables PCI support for the Intel PCH/PCU SPI controller in
509 master mode. This controller is used to hold BIOS and other
511 only work in hardware sequencing mode, this means that the
513 use. Using this driver it is possible to upgrade BIOS directly
516 To compile this driver as a module, choose M here: the module
525 This enables platform support for the Intel PCH/PCU SPI
530 this driver it is possible to upgrade BIOS directly from Linux.
535 To compile this driver as a module, choose M here: the module
542 This enables support for the SPI master controller in the J-Core
551 This driver supports KEBA SPI master type 2 FPGA implementation,
554 This driver can also be built as a module. If so, the module
562 This driver supports the NS LM70 LLP Evaluation Board,
575 This bus driver supports the Loongson SPI hardware controller in
586 This bus driver supports the Loongson SPI hardware controller in
596 This driver provides an SPI master device to drive Maxim
606 This drivers supports the MPC52xx SPI controller in master SPI
613 This enables using the Freescale MPC52xx Programmable Serial
620 This enables using the Freescale MPC5121 Programmable Serial
637 This enables using the Freescale SPI controllers in master mode.
640 This also enables using the Aeroflex Gaisler GRLIB SPI controller in
648 This enables support for the Freescale DSPI controller in master
655 This enables using the Freescale eSPI controllers in master mode.
657 P20xx, P30xx,P40xx, P50xx uses this controller.
664 Select this option to enable SPI driver for the Intel
667 This driver can also be built as a module. If so, the module
675 This enables master mode support for the SPICC (SPI communication
683 This enables master mode support for the SPIFC (SPI flash
690 This enables the SPI driver for Microchip FPGA SPI controllers.
699 This enables the QSPI driver for Microchip FPGA QSPI controllers.
708 This selects the MediaTek(R) SPI bus driver.
717 This selects a driver for the MediaTek MT7621 SPI Controller.
723 This enables support for SPI NOR controller found on MediaTek
724 ARM SoCs. This is a controller specifically for SPI NOR flash.
734 This enables support for SPI-NAND mode on the MediaTek NAND
735 Flash Interface found on MediaTek ARM SoCs. This controller
744 This enables support got the Flash Interface Unit SPI controller
747 This driver does not support generic SPI. The implementation only
755 This enables support for the Flash Interface Unit SPI controller
757 This driver does not support generic SPI. The implementation only
764 This driver provides support for Nuvoton NPCM BMC
771 This driver supports the Lantiq SSC SPI controller in master
772 mode. This controller is found on Intel (former Lantiq) SoCs like
780 This is the driver for OpenCores tiny SPI master controller.
794 This hooks up to the MicroWire controller on OMAP1 chips.
809 This device supports single, dual and quad read support, while
816 This enables using the SPI master controller on the Orion
824 This is a PCI to SPI Bus driver
825 This driver can be built as module. If so, the module will be
847 This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
856 This selects a driver for the PPC4xx SPI Controller.
863 This enables using a PXA2xx or Sodaville SSP port as a SPI master
874 This enables support for the SPI-NAND Flash controller on
877 This driver does not support generic SPI. The implementation
884 This selects a driver for Rockchip SPI controller.
886 If you say yes to this option, support will be included for
889 The main usecase of this controller is to use spi flash as boot
897 This enables support for Rockchip serial flash controller. This
945 This driver can also be built as a module. If so, the module
952 This driver supports GENI serial engine based SPI controller in
954 yes to this option, support will be included for the built-in SPI
957 This driver can also be built as a module. If so, the module
1003 This exposes the SPI controller IP from SiFive.
1010 This selects the MediaTek(R) SPI slave device driver.
1020 This enables support for the Socionext F_OSPI controller
1054 This enables support for the Quad SPI controller in master mode.
1055 This driver does not support generic SPI. The implementation only
1063 this option, support will be included for the SSC driven SPI.
1076 This enables using the SPI controller on the Allwinner A31 SoCs.
1082 This enables Sunplus SP7021 SPI controller driver on the SP7021 SoCs.
1083 This driver can also be built as a module. If so, the module will be
1104 This selects the Macronix MX25F0A SPI controller driver.
1118 QSPI driver for NVIDIA Tegra QSPI Controller interface. This
1127 SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
1129 get changed with this controller.
1137 The main usecase of this controller is to use spi flash as boot
1161 This driver also supports the ML7213/ML7223/ML7831, a companion chip
1169 This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
1174 This driver supports SCSSI only.
1190 This exposes the SPI controller IP from the Xilinx EDK.
1214 This simple SPI master controller is built into xtfpga bitstreams
1224 This enables support for the Zynq Quad SPI controller
1226 This controller only supports SPI memory interface.
1233 This controller only supports SPI memory interface.
1242 # Add new SPI master controllers in alphabetical order above this line
1251 This adds support for SPI multiplexers. Each SPI mux will be
1253 to be chip selects on this controller. It is still necessary to
1265 This supports user mode SPI protocol drivers.
1271 This enables the SPI loopback testing framework driver
1281 such as the TLE6220, TLE6230 and TLE6240. This provides a
1286 # Add new SPI protocol masters in alphabetical order above this line