Lines Matching full:if
19 Generic RTC class support. If you say yes here, you will
23 if RTC_CLASS
29 If you say yes here, the system time (wall clock) will be set using
48 If the clock you specify here is not battery backed, it may still
57 If you say yes here, the system time (wall clock) will be stored
59 minutes if userspace reports synchronized NTP status.
64 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
79 tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
85 If unsure, say N.
102 Say yes here if you want to use your RTCs using sysfs interfaces,
105 If unsure, say Y.
112 Say yes here if you want to use your system clock RTC through
115 If there is no RTC for the system clock, then the first RTC(rtc0)
118 If unsure, say Y.
124 Say yes here if you want to use your RTCs using the /dev
133 If unsure, say Y.
139 Provides an emulation for RTC_UIE if the underlying rtc chip
145 only if you know that you really need it.
150 If you say yes here you get support for the
154 You want this driver only if you are doing development
158 This driver can also be built as a module. If so, the module
163 if I2C
169 If you say yes here you get support for RTC function in Marvell
172 This driver can also be built as a module. If so, the module
179 If you say yes here you get support for RTC function in Marvell
182 This driver can also be built as a module. If so, the module
189 If you say yes here you will get support for the RTC function in the
192 This driver can also be built as a module. If so, the module
199 If you say yes here you get support for the Abracon
202 This driver can also be built as a module. If so, the module
209 If you say yes here you get support for the Abracon
212 This driver can also be built as a module. If so, the module
217 select WATCHDOG_CORE if WATCHDOG
219 If you say yes here you get support for Abracon AB080X and AB180X
223 This driver can also be built as a module. If so, the module
230 If you say yes here you get support for the real-time clock found
233 This driver can also be built as a module. If so, the module
241 If you say yes here you get support for the wake-timer found on
244 This driver can also be built as a module. If so, the module will
251 If you say yes here you get support for the RTC of ams AS3722 PMIC
254 This driver can also be built as a module. If so, the module
260 select WATCHDOG_CORE if WATCHDOG
262 If you say yes here you get support for various compatible RTC
274 This driver can also be built as a module. If so, the module
285 Setting this option will add proper support for the century bit but if
294 If you say yes here you get support for Dallas Semiconductor
295 DS1374 real-time clock chips. If an interrupt is associated
298 This driver can also be built as a module. If so, the module
306 If you say Y here you will get support for the
313 If you say yes here you get support for the
316 This driver can also be built as a module. If so, the module
327 This driver can also be built as a module. If so, the module
339 If you say yes here you will get support for the
342 This driver can also be built as a module. If so, the module
350 If you say yes here you will get support for the
353 This driver can also be built as a module. If so, the module
360 If you say yes here you will get support for the
363 This driver can also be built as a module. If so, the module
370 If you say yes here you will get support for the
373 This driver can also be built as a module. If so, the module
380 If you say yes here you will get support for the
383 This driver can also be built as a module. If so, the module
393 If you say yes here you get support for the Analog Devices
396 This driver can also be built as a module. If so, the module
403 If you say yes here you will get support for the
406 This driver can also be built as a module. If so, the module
413 If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC
416 This driver can also be built as a module, if so, the module will be
423 If you say yes here you will get support for the
426 This driver can also be built as a module. If so, the module
432 If you say yes here you get support for the
435 This driver can also be built as a module. If so, the module
441 If you say yes here you get support for the
444 This driver can also be built as a module. If so, the module
451 If you say yes here you get support for the
454 This driver can also be built as a module. If so, the module
461 If you say yes here you get support for the
464 This driver can also be built as a module. If so, the module
470 If you say yes here you get support for the
473 This driver can also be built as a module. If so, the module
480 If you say yes here you get support for the NXP PCF8523 RTC
483 This driver can also be built as a module. If so, the module
490 If you say yes here you get support for the PCF85063 RTC chip
492 This driver can also be built as a module. If so, the module
499 If you say yes here you get support for the PCF85363 RTC chip.
501 This driver can also be built as a module. If so, the module
511 If you say yes here you get support for the
515 This driver can also be built as a module. If so, the module
521 If you say yes here you get support for the Philips PCF8583
527 This driver can also be built as a module. If so, the module
533 If you say Y here you will get support for the ST M41T60
538 This driver can also be built as a module. If so, the module
545 If you say Y here you will get support for the
552 If you say Y here you will get support for the RTC
555 This driver can also be built as a module. If so, the module
561 If you say Y here you will get support for the TI
564 This driver can also be built as a module. If so, the module
571 If you say yes here you get support for the RTC on the
581 If you say yes here you get support for the RTC on the
584 This driver can also be built as a module. If so, the module
591 If you say yes here you get support for the RTC of TI PALMA series PMIC
594 This driver can also be built as a module. If so, the module
614 This driver can also be built as a module. If so, the module
621 If you say yes here you get support for the RTC on the
624 This driver can also be built as a module. If so, the module
631 If you say yes here you get support for the RTC on the
634 This driver can also be built as a module. If so, the module
641 If you say yes here you get support for the RTC on the
644 This driver can also be built as a module. If so, the module
651 If you say yes here you will get support for the Seiko
654 This driver can also be built as a module. If so the module
660 If you say Y here you will get support for the
665 This driver can also be built as a module. If so the module
672 If you say yes here you get support for the Epson RX8010SJ RTC
675 This driver can also be built as a module. If so, the module
683 If you say yes here you will get support for the Epson RX8111 RTC.
685 This driver can also be built as a module. If so, the module will be
692 If you say yes here you will get support for the Epson RX-8571/
695 This driver can also be built as a module. If so the module
701 If you say yes here you get support for the Epson
704 This driver can also be built as a module. If so, the module
710 If you say yes here you get support for the EM
713 This driver can also be built as a module. If so, the module
720 If you say yes here you get support for the Micro Crystal
723 This driver can also be built as a module. If so, the module
730 If you say yes here you get support for the Micro Crystal
733 This driver can also be built as a module. If so, the module
739 If you say yes here you get support for the Micro Crystal RV8803 and
742 This driver can also be built as a module. If so, the module
751 If you say yes here you will get support for the
754 This driver can also be built as a module. If so, the module
761 If you say yes here you will get support for the
764 This driver can also be built as a module. If so, the module
771 If you say yes here you get support for the ZXW Shenzhen whwave
774 This driver can also be built as a module. If so, the module
781 if SPI_MASTER
786 If you say yes here you will get support for the
789 This driver can also be built as a module. If so, the module
795 If you say yes here you will get support for the
798 This driver can also be built as a module. If so, the module
805 If you say yes here you get support for the Dallas DS1302 RTC chips.
807 This driver can also be built as a module. If so, the module
817 This driver can also be built as a module. If so, the module
824 If you say yes here you get support for the
828 This driver can also be built as a module. If so, the module
835 If you say yes here you get support for the
841 This driver can also be built as a module. If so, the module
847 If you say yes here you get support for the
853 This driver can also be built as a module. If so, the module
859 If you say yes here you will get support for the
865 This driver can also be built as a module. If so, the module
871 If you say yes here you will get support for the
874 This driver can also be built as a module. If so, the module
880 If you say yes here you will get support for the Epson RX-4581.
882 This driver can also be built as a module. If so the module
888 If you say yes here you get support for the
891 This driver can also be built as a module. If so, the module
897 If you say yes here you will get support for the
900 This driver can also be built as a module. If so, the module
907 If you say yes here you get support for the NXP PCF2123
910 This driver can also be built as a module. If so, the module
916 If you say yes here you will get support for the Microchip MCP795.
918 This driver can also be built as a module. If so the module
929 default m if I2C=m
930 default y if I2C=y
931 default y if SPI_MASTER=y
938 select REGMAP_I2C if I2C
939 select REGMAP_SPI if SPI_MASTER
941 If you say yes here you get support for Dallas Semiconductor
942 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
945 This driver can also be built as a module. If so, the module
953 Say Y here if you want to expose temperature sensor data on
959 select REGMAP_I2C if I2C
960 select REGMAP_SPI if SPI_MASTER
961 select WATCHDOG_CORE if WATCHDOG
963 If you say yes here you get support for the NXP PCF2127/29/31 RTC
971 This driver can also be built as a module. If so, the module
977 select REGMAP_I2C if I2C
978 select REGMAP_SPI if SPI_MASTER
980 If you say yes here you get support for the Micro Crystal
983 This driver can also be built as a module. If so, the module
992 Say Y here if you want to expose temperature sensor data on
998 select REGMAP_SPI if SPI_MASTER
999 select REGMAP_I2C if I2C
1001 If you say yes here you will get support for the Epson RX-6110.
1003 This driver can also be built as a module. If so the module
1016 default y if X86
1027 you can safely enable this driver if you don't know whether
1030 This driver can also be built as a module. If so, the module
1041 system, specifically MC146818 compatibles. If in doubt, say Y.
1047 If you say yes here you get support for the Dallas DS1216 RTC chips.
1053 If you say yes here you get support for the Dallas DS1286 RTC chips.
1059 If you say yes here you get support for the
1062 This driver can also be built as a module. If so, the module
1069 If you say yes here you get support for the
1072 This driver can also be built as a module. If so, the module
1079 If you say yes here you get support for the Dallas/Maxim DS1685
1084 This driver can also be built as a module. If so, the module
1147 If you say yes here you get support for the
1150 This driver can also be built as a module. If so, the module
1156 If you say yes here you get support for the
1159 This driver can also be built as a module. If so, the module
1173 If you say yes here you will get support for the
1176 This driver can also be built as a module. If so, the module
1183 If you say yes here you will get support for the RTC subsystem
1186 This driver can also be built as a module. If so, the module
1193 If you say yes here you will get support for the EFI
1196 This driver can also be built as a module. If so, the module
1203 If you say yes here you get support for the
1206 This driver can also be built as a module. If so, the module
1213 If you say Y here you will get support for the
1216 This driver can also be built as a module. If so, the module
1223 If you say Y here you will get support for the
1226 This driver can also be built as a module, if so, the module
1233 If you say Y here you will get support for the
1239 This driver can also be built as a module, if so, the module
1246 If you say yes here you get support for the Oki MSM6242
1249 This driver can also be built as a module. If so, the module
1257 If you say Y here you will get support for the TI
1260 This driver can also be built as a module. If so, the module
1267 If you say yes here you get support for the Ricoh RP5C01
1271 This driver can also be built as a module. If so, the module
1279 If you say yes here you will get support for the RTC subsystem
1282 This driver can also be built as a module. If so, the module
1289 If you say yes here you will get support for the RTC subsystem
1292 This driver can also be built as a module. If so, the module
1299 If you say yes here you will get support for the RTC subsystem
1302 This driver can also be built as a module. If so, the module
1309 If you say Y here you will get support for the RTC subsystem
1313 This driver can also be built as a module. If so, the module
1321 If you say Y here you will get support for the RTC found on
1328 If you say yes here you get support for the RTC subsystem of the
1345 If you say yes here you get support for the PowerNV platform RTC
1348 This driver can also be built as a module. If so, the module
1358 This driver can also be built as a module. If so, the module
1365 If you say yes here you get support for the RTC controller found on
1372 If you say yes here you will get support for the
1375 This driver can also be built as a module. If so, the module
1382 Say yes here if you want to support the RTC functionality of the
1392 If you say yes here you get support for the RTC on the
1395 This driver can also be built as a module. If so, the module
1402 If you say yes here you get support for the RTC on Conexant
1405 This driver can also be built as a module. If so, the module
1415 This driver can also be built as a module, if so, the module
1428 This driver can also be built as a module, if so, the module
1439 This driver can also be built as a module, if so, the module
1445 default m if ARCH_MESON
1447 If you say yes here you will get support for the
1450 This driver can also be built as a module. If so, the module
1463 This driver can also be built as a module, if so, module
1476 This driver can also be build as a module. If so, the module
1483 If you say yes here you get support for the
1486 This driver can also be built as a module. If so, the module
1493 If you say Y here you will get access to the real time clock
1519 This driver can also be built as a module. If so, the module
1526 If you say Y here you will get access to ARM AMBA
1536 If you say Y here you will get access to ARM AMBA
1573 This driver can also be built as a module. If so, the module
1580 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1587 If you say yes here you get support for the Renesas RZ/N1 RTC.
1596 RTC abstraction. If you do not know what you are doing, you should
1604 If you say Y here you will get access to the real time clock
1615 If you say Y here you will get access to the real time clock
1623 If you say Y here you will get support for the Hypervisor
1632 If you say Y here you will get support for the RTC found in
1639 If you say Y here you will get support for the RTC found on
1646 If you say Y here you will get support for the RTC found on
1653 If you say yes here you will get support for the in-chip RTC
1657 This driver can also be built as a module. If so, the module
1665 If you say yes here you will get support for the in-chip RTC
1668 This driver can also be built as a module. If so, the module
1675 If you say Y here you will get access to Cadence RTC IP
1686 If you say Y here you will get support for the
1689 This driver can also be built as a module. If so, the module
1696 If you say yes here you will get support for the RTC on PS3.
1698 This driver can also be built as a module. If so, the module
1706 If you say yes here you will get support for the onboard
1709 This driver can also be built as a module. If so, the module
1716 If you say Y here you will get support for the RTC found on
1730 If you say yes here you will get support for the
1733 This driver can also be built as a module. If so, the module
1741 If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1744 This driver can also be built as a module. If so, the module
1757 This driver can also be built as a module. If so, the module
1769 If you have one of the devices above enable this driver to use
1770 the hardware RTC. This driver can also be built as a module. If
1779 This driver can also be built as a module. If so, the module
1786 If you say yes here you get support for the
1796 If you say yes here you get support for the
1799 This drive can also be built as a module. If so, the module
1808 If you say yes here you get support for the Freescale MXC
1811 This driver can also be built as a module, if so, the module
1820 If you say yes here you get support for the Freescale MXC
1823 This driver can also be built as a module, if so, the module
1833 If you say yes here you get support for the Freescale SNVS
1836 This driver can also be built as a module, if so, the module
1846 If you say yes here you get support for the NXP BBNSM RTC module.
1848 This driver can also be built as a module, if so, the module
1853 default y if ARCH_MXC
1856 If you say yes here you get support for the NXP i.MX BBSM SCMI
1867 If you say yes here you get support for the NXP i.MX System
1885 If you say yes here you get support for the MOXA ART
1888 This driver can also be built as a module. If so, the module
1898 This drive can also be built as a module. If so, the module
1910 If you want to use MediaTek(R) RTC interface, select Y or M here.
1919 This drive can also be built as a module. If so, the module
1927 If you say yes here you get support for the APM X-Gene SoC real time
1930 This driver can also be built as a module, if so, the module
1938 If you say yes here you get support for the PIC32 RTC module.
1940 This driver can also be built as a module. If so, the module
1948 If you say yes here you get support for the EPSON TOYOCOM
1951 This driver can also be built as a module. If so, the module
1965 If you say yes here you get support for the STM32 On-Chip
1968 This driver can also be built as a module, if so, the module
1983 If you say yes here, you get support for the RTD1295 SoC
1991 If you say yes here you get support for the ASPEED BMC SoC real time
1994 This driver can also be built as a module, if so, the module
2002 If you say yes here you get support for the Texas Instruments's
2005 This driver can also be built as a module, if so, the module
2013 If you say yes here you get support for the Nuvoton MA35D1
2016 This driver can also be built as a module, if so, the module
2023 If you say yes here you get support for the Renesas RTCA-3 RTC
2026 This driver can also be built as a module, if so, the module
2040 If this driver is compiled as a module, it will be named
2057 If you say yes here, you get read/write support for the Real Time
2060 This can also be built as a module. If so, the module will
2067 If you say yes here you get support for the Mstar MSC313e On-Chip
2070 This driver can also be built as a module, if so, the module
2077 If you say yes here you will get support for the
2080 This driver can also be built as a module, if so, the module
2088 If you say yes here you get support for the SigmaStar SSD202D On-Chip
2091 This driver can also be built as a module, if so, the module
2100 If you say yes here you get support for the RTC block on the
2103 This driver can also be built as a module. If so, the module