Lines Matching full:valid
241 * Field only valid when for the received frame type the corresponding
245 * Field only valid when for the received frame type the corresponding
309 * Field only valid when AST_based_lookup_valid == 1.
332 * Field only valid when key_type is set to wep_varied_width.
340 * Field only valid when bssid_hit is set.
345 * Field only valid when mpdu_qos_control_valid is set
377 * When set, AST based lookup for this frame has found a valid
402 * When set, the field Mpdu_Frame_control_field has valid information
405 * When set, the field Mpdu_duration_field has valid information
408 * When set, the fields mac_addr_adx_..... have valid information
413 * have valid information as well as field
419 * When set, the field mpdu_qos_control_field, mpdu_ht_control has valid
426 * PN are valid
431 * Field only valid when Mpdu_sequence_control_valid is set
441 * Field only valid when Mpdu_frame_control_valid is set
446 * Field only valid when Mpdu_frame_control_valid is set
451 * Field only valid when Mpdu_frame_control_valid is set.
455 * Field only valid when Mpdu_frame_control_valid is set.
456 * Retry bit from the frame control. Only valid when first_msdu is set
459 * Field only valid when Mpdu_sequence_control_valid is set.
464 * Field only valid when Frame_encryption_info_valid is set
517 * 0. The PPDU start status will only be valid when this bit
527 * Only valid when first_msdu is set. Indicates no AST matching
531 * Only valid when first_msdu is set. Indicates an unsuccessful
587 * Frame control field in header. Only valid when the field is marked valid.
590 * Duration field in header. Only valid when the field is marked valid.
593 * MAC addresses in the received frame. Only valid when corresponding
594 * address valid bit is set
597 * QoS/HT control fields from header. Valid only when corresponding fields
598 * are marked valid
624 * Multi-link receiver address1,2. Only valid when corresponding
625 * valid bit is set
911 * MPDU length before decapsulation. Only valid when first_msdu is
943 * da_offset field is valid. This will be set to 0 in case
947 * sa_offset field is valid. This will be set to 0 in case
990 * Indicates that OLE found a valid SA entry.
993 * Indicates that OLE found a valid DA entry.
996 * Field Only valid if da_is_valid is set. Indicates the DA address
1011 * valid when last_msdu is set.
1101 * flow id is not valid.
1117 * The key ID octet from the IV. Only valid when first_msdu is set.
1160 * This field is still valid for MPDU frames without A-MSDU.
1173 * decapsulation. The latter is only valid if ipv4_proto or
1181 * L4 offset in bytes from the start of RX_HEADER (only valid
1184 * the start of the IP header after decapsulation (Only valid if
1274 * Field only valid when pkt type is HT, VHT or HE. Values are
1289 * Field only valid when
1305 * are all valid. This bit is in the last 64-bit of the descriptor
1348 * 0. The PPDU start status will only be valid when this bit
1358 * Only valid when first_msdu is set. Indicates no AST matching
1362 * Only valid when first_msdu is set. Indicates an unsuccessful
1477 * flow id is not valid.
1491 * valid. This bit must be in the last octet of the