Lines Matching full:flash
2 menu "RAM/ROM/Flash chip drivers"
6 tristate "Detect flash chips by Common Flash Interface (CFI) probe"
10 The Common Flash Interface specification was developed by Intel,
11 AMD and other flash manufactures that provides a universal method
12 for probing the capabilities of flash devices. If you wish to
18 tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
22 This option enables JEDEC-style probing of flash chips which are not
23 compatible with the Common Flash Interface, but will use the common
24 CFI-targeted flash drivers for any chips which are identified which
33 bool "Flash chip driver advanced configuration options"
36 If you need to specify a specific endianness for access to flash
38 support for only specific arrangements of flash chips, say 'Y'. This
45 prompt "Flash cmd/query data swapping"
71 bool "Specific CFI Flash geometry selection"
128 bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
131 If your flash chips are not interleaved - i.e. you only have one
132 flash chip addressed by each bus cycle, then say 'Y'.
135 bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
138 If your flash chips are interleaved in pairs - i.e. you have two
139 flash chips addressed by each bus cycle, then say 'Y'.
142 bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
145 If your flash chips are interleaved in fours - i.e. you have four
146 flash chips addressed by each bus cycle, then say 'Y'.
149 bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
152 If your flash chips are interleaved in eights - i.e. you have eight
153 flash chips addressed by each bus cycle, then say 'Y'.
161 "Protection Registers" present on some flash chips.
185 The Common Flash Interface defines a number of different command
195 The Common Flash Interface defines a number of different command
205 The Common Flash Interface defines a number of different command
239 This allows MTD support to work with flash memory which is also