Lines Matching full:this
12 This is an option for use by developers; most people should
13 say N here. This enables MMC host driver debugging. And further
30 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
41 This selects the Qualcomm Data Mover lite/local on SD Card controller.
42 This option will enable the dma to work correctly, if you are using
43 Qcom SOCs and MMC, you would probably need this option to get DMA working.
52 This selects the STMicroelectronics STM32 SDMMC host controller.
61 This selects the Intel(R) PXA(R) Multimedia card Interface.
71 This selects the generic Secure Digital Host Controller Interface.
73 and Toshiba(R). Most controllers found in laptops are of this type.
75 If you have a controller with this interface, say Y or M here. You
84 This is silent Kconfig symbol that is selected by the drivers that
92 This option is selected by drivers running on big endian hosts
95 This endian mapping mode is called "data invariance" and
99 This is the case for the Nintendo Wii SDHCI.
105 This option is selected by SDHCI controller drivers that want to
108 If you have a controller with this feature, say Y or M here.
118 This selects the PCI Secure Digital Host Controller Interface.
121 If you have a controller with this interface, say Y or M here.
130 This adds a pci quirk to disable Ricoh MMC Controller. This
134 useless. It is safe to select this even if you don't
144 This selects support for ACPI enumerated SDHCI controllers,
148 If you have a controller with this interface, say Y or M here.
156 This selects the common helper functions support for Secure Digital
159 If you have a controller with this interface, say Y or M here.
170 This selects the Arasan Secure Digital Host Controller Interface
171 (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
173 If you have a controller with this interface, say Y or M here.
184 This selects the ASPEED Secure Digital Host Controller Interface.
186 If you have a controller with this interface, say Y or M here. You
197 Enable KUnit tests for the ASPEED SDHCI driver. Select this
212 This selects the Atmel SDMMC driver
221 This selects the Freescale eSDHC controller support.
223 If you have a controller with this interface, say Y or M here.
233 This selects the Secure Digital Host Controller Interface (SDHCI)
237 If you have a controller with this interface, say Y or M here.
248 This selects Synopsys DesignWare Cores Mobile Storage Controller
250 If you have a controller with this interface, say Y or M here.
258 This selects the Secure Digital Host Controller Interface (SDHCI)
261 If you have a Sparx5 SoC with this interface, say Y or M here.
270 This selects the MA35D1 Secure Digital Host Controller Interface.
273 If you have a controller with this interface, say Y or M here.
283 This selects the Cadence SD/SDIO/eMMC driver.
285 If you have a controller with this interface, say Y or M here.
295 This selects the Freescale eSDHC controller support for
298 If you have a controller with this interface, say Y or M here.
310 This selects the Freescale eSDHC/uSDHC controller support
313 If you have a controller with this interface, say Y or M here.
323 This selects the Secure Digital Host Controller Interface in
326 If you have a controller with this interface, say Y or M here.
337 This selects the Tegra SD/MMC controller. If you have a Tegra
347 This selects the Secure Digital Host Controller Interface (SDHCI)
351 If you have a controller with this interface (thereforeyou build for
363 This selects the Marvell(R) PXAV3 SD Host Controller.
377 This selects the Marvell(R) PXAV2 SD Host Controller.
389 This selects the Secure Digital Host Controller Interface (SDHCI)
393 If you have a controller with this interface, say Y or M here.
412 This selects the Broadcom Kona Secure Digital Host Controller
414 This is used in Broadcom mobile SoCs.
416 If you have a controller with this interface, say Y or M here.
423 This selects the Secure Digital Host Controller Interface (SDHCI)
425 If you have a controller with this interface, say Y or M here.
434 This selects the Secure Digital Host Controller Interface (SDHCI)
436 If you have a controller with this interface, say Y or M here.
448 This selects the iProc SD/MMC controller.
460 This provides support for the SD/eMMC controller found in
468 This selects support for the Amlogic SD/MMC Host Controller
469 found on the S905/GX*/AXG family of SoCs. This controller is
472 If you have a controller with this interface, say Y here.
480 This selects support for the SDHC Host Controller on
485 If you have a controller with this interface, say Y or M here.
494 This selects support for the SD/MMC Host Controller on
497 If you have a controller with this interface, say Y or M here.
504 This selects support for the MOXART SD/MMC Host Controller.
507 If you have a controller with this interface, say Y here.
515 This selects the Secure Digital Host Controller Interface in
518 If you have a controller with this interface, say Y or M here.
525 This selects the TI OMAP Multimedia card Interface.
535 This selects the TI OMAP High Speed Multimedia card Interface.
545 This selects the Winbond(R) W83L51xD Secure digital and
564 This selects the AMD Alchemy(R) Multimedia card interface.
573 This selects the Atmel Multimedia Card Interface driver.
587 This selects the Secure Digital Host Controller Interface (SDHCI)
591 If you have a controller with this interface, say Y or M here.
599 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
609 This selects the Freescale SSP MMC controller found on MXS based
622 This option 'selects' (turns on, enables) 'TIFM_CORE', but you
627 To compile this driver as a module, choose M here: the
635 This selects the Marvell SDIO host driver.
639 To compile this driver as a module, choose M here: the
646 This selects the TI DAVINCI Multimedia card Interface.
657 instead of using a "native" MMC/SD/SDIO controller. This has a
671 To compile this driver as a module, choose M here: the
681 This selects the SDIO Host Controller in Spreadtrum
682 SoCs, this driver supports R11(IP version: R11P0).
684 If you have a controller with this interface, say Y or M here.
697 This provides support for the SDHI SD/SDIO controller found in
705 This provides DMA support for SDHI SD/SDIO controllers
706 using SYS-DMAC via DMA Engine. This supports the controllers
715 This provides DMA support for SDHI SD/SDIO controllers
716 using on-chip bus mastering. This supports the controllers
717 found in arm64 based SoCs. This controller is also found in
726 This provides support for the SD/eMMC controller found in
727 UniPhier SoCs. The eMMC variant of this controller is used
735 This option enables support for MMC/SD part of ENE CB710/720 Flash
739 This driver can also be built as a module. If so, the module
746 This selects the VIA SD/MMC Card Reader driver, say Y or M here.
748 some motherboards manufactured by VIA. This card reader supports
750 If you have a controller with this interface, say Y or M here.
758 This selects Cavium OCTEON SD/MMC card Interface.
770 This selects Cavium ThunderX SD/MMC Card Interface.
779 This selects support for the Synopsys DesignWare Mobile Storage IP
780 block, this provides host support for SD and MMC interfaces, in both
788 This selects the common helper functions support for Host Controller
789 Interface based platform driver. Please select this option if the IP
790 is present as a platform device. This is the common interface for the
793 If you have a controller with this interface, say Y or M here.
802 This selects support for Mellanox BlueField SoC specific extensions to
803 the Synopsys DesignWare Memory Card Interface driver. Select this
811 This selects support for Samsung Exynos SoC specific extensions to the
812 Synopsys DesignWare Memory Card Interface driver. Select this option
820 This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
821 Synopsys DesignWare Memory Card Interface driver. Select this option
829 This selects support for HiSilicon Hi3798MV200 SoC specific extensions to the
830 Synopsys DesignWare Memory Card Interface driver. Select this option
838 This selects support for Hisilicon K3 SoC specific extensions to the
839 Synopsys DesignWare Memory Card Interface driver. Select this option
846 This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
847 Select this option if the IP is present on PCI platform.
849 If you have a controller with this interface, say Y or M here.
858 This selects support for Rockchip SoC specific extensions to the
859 Synopsys DesignWare Memory Card Interface driver. Select this option
868 This selects support for StarFive JH7110 SoC specific extensions to the
869 Synopsys DesignWare Memory Card Interface driver. Select this option
876 This selects the MMC Host Interface controller (MMCIF) found in various
884 This selects support for the SD/MMC controller on Ingenic
894 This selects support for Elan Digital Systems' VUB300 chip.
914 To compile this mmc host controller driver as a module,
925 This selects support for USB SD Host Controllers based on
929 CSR boards with this device include: USB<>SDIO (M1985v2),
940 This selects support for the SD/MMC Host Controller on
943 To compile this driver as a module, choose M here: the
950 This selects support for the Renesas USDHI6ROL0 SD/SDIO
972 This selects support for the SD/MMC Host Controller on
979 This selects the Command Queue Host Controller Interface (CQHCI)
982 This controller supports eMMC devices with command queue support.
984 If you have a controller with this interface, say Y or M here.
991 This selects the MMC Host Software Queue support. This may increase
994 If you have a controller/driver supporting this interface, say Y or M
1007 This selects the BCM2835 SDHOST MMC controller. If you have
1012 sdhost controller (supported by this driver).
1024 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
1026 This is needed if support for any SD/SDIO/MMC devices is required.
1033 This selects the Secure Digital Host Controller Interface (SDHCI)
1036 If you have a controller with this interface, say Y or M here.
1047 This selects support for the SDIO/SD/MMC Host Controller on
1056 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1057 If you have a controller with this interface, say Y or M here.
1068 This selects the Secure Digital Host Controller Interface (SDHCI)
1072 If you have a controller with this interface, say Y or M here.
1084 This selects the Secure Digital Host Controller Interface (SDHCI)
1088 If you have a controller with this interface, say Y or M here.
1097 This selects support for the SD/MMC Host Controller on
1109 This selects support for the MMC Host Controller found in LiteX SoCs.
1111 To compile this driver as a module, choose M here: the