Lines Matching full:sdio
6 comment "MMC/SD/SDIO Host Controller Drivers"
271 The controller supports SD/MMC/SDIO devices.
278 tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
283 This selects the Cadence SD/SDIO/eMMC driver.
424 Needed by some Fujitsu SoC for MMC / SD / SDIO support.
435 Needed by Milbeaut SoC for MMC / SD / SDIO support.
470 MMC 5.1 compliant and supports SD, eMMC and SDIO interfaces.
482 The controller supports the SD/SDIO Spec 3.x and eMMC Spec 4.5x
589 SD/MMC/SDIO devices.
631 tristate "Marvell MMC/SD/SDIO host driver"
635 This selects the Marvell SDIO host driver.
636 SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
651 tristate "MMC/SD/SDIO over SPI"
656 Some systems access MMC/SD/SDIO cards using a SPI controller
657 instead of using a "native" MMC/SD/SDIO controller. This has a
659 advantage of working on many systems without dedicated MMC/SD/SDIO
675 tristate "Spreadtrum SDIO host Controller"
681 This selects the SDIO Host Controller in Spreadtrum
692 tristate "Renesas SDHI SD/SDIO controller support"
697 This provides support for the SDHI SD/SDIO controller found in
701 tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
705 This provides DMA support for SDHI SD/SDIO controllers
710 tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
715 This provides DMA support for SDHI SD/SDIO controllers
891 tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
896 The VUB300 is a USB-SDIO Host Controller Interface chip
897 that enables the host computer to use SDIO/SD/MMC cards
901 USB to SDIO/SD/MMC adapters and embedded on some motherboards.
904 to single and multifunction SDIO cards.
906 Some SDIO cards will need a firmware file to be loaded and
929 CSR boards with this device include: USB<>SDIO (M1985v2),
932 Note: These controllers only support SDIO cards and do not
947 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
950 This selects support for the Renesas USDHI6ROL0 SD/SDIO
1026 This is needed if support for any SD/SDIO/MMC devices is required.
1041 tristate "Broadcom SDIO/SD/MMC support"
1047 This selects support for the SDIO/SD/MMC Host Controller on
1053 tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
1056 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1070 supports SD/MMC/SDIO devices.
1086 supports SD/MMC/SDIO devices.