Lines Matching full:this
5 This option provides the function gpio_led_register_device.
6 As this function is used by arch code it must not be compiled as a
9 # This library does not depend on NEW_LEDS and must be independent so it can be
18 Say Y to enable Linux LED support. This allows control of supported
26 This option enables the LED sysfs class in /sys/class/leds. You'll
27 need this to do anything useful with LEDs. If unsure, say Y.
33 This option enables the flash LED sysfs class in /sys/class/leds.
35 and kernel internal API to it. You'll need this to provide support
43 This option enables the multicolor LED sysfs class in /sys/class/leds.
45 and kernel internal API to it. You'll need this to provide support
46 for multicolor LEDs that are grouped together. This class is not
53 This option enables support for the brightness_hw_changed attribute
65 This option enables support for on-chip LED drivers found on Marvell
72 This option enables support for the AN30259A 3-channel
75 To compile this driver as a module, choose M here: the module
83 This driver makes the PC Engines APU1 front panel LEDs
89 To compile this driver as a module, choose M here: the
97 This driver adds support for controlling the front panel status
108 This option enables support for the Awinic AW200XX LED controllers.
117 To compile this driver as a module, choose M here: the module
125 This option enables support for the AW2013 3-channel
128 To compile this driver as a module, choose M here: the module
137 This option enables support for LEDs connected to the BCM6328
146 This option enables support for LEDs connected to the BCM6358
154 This option enables support for charger and general purpose LEDs
157 To compile this driver as a module, choose M here: the module
166 This option enables support for LEDs offered by Motorola's
175 This option enables support for CR0014114 LED Board which
179 To compile this driver as a module, choose M here: the module
189 This option enables support for LEDs managed by ChromeOS ECs.
194 To compile this driver as a module, choose M here: the module
203 This option enables support for EL15203000 LED Board
207 To compile this driver as a module, choose M here: the module
224 This option enables basic support for the LEDs found on the front
233 This option enables support for the LCD backlight using
234 LM3530 ambient light sensor chip. This ALS chip can be
244 This option enables support for the LCD backlight using
245 LM3532 ambient light sensor chip. This ALS chip can be
254 This option enables support for the LEDs on National Semiconductor /
267 This option enables support for LEDs connected to LM3642.
277 This option enables support for the TI LM3692x family
285 This option enables support for the LEDs on Sharp Locomo.
293 This option enables support for the so called "User LED" of
301 This option enables support for on-chip LED drivers found on
309 This option enables support for the Soekris net4801 and net4826 error
317 This option enables support for the PCEngines WRAP programmable LEDs.
324 This option enables support for the front LED on Cobalt Qube series
331 This option enables support for the Cobalt Raq series LEDs.
338 This option enables support for the RGB LED controller found
348 This option enables support for the Left, Middle, and Right
356 Choose this option if you want to use the notification LED on
364 This option enables LED support for the handheld
372 This option enables support for NXP pca9532
391 This option enables support for the LEDs connected to GPIO
402 This option enables support for LEDs connected to the National
406 To compile this driver as a module, choose M here: the
416 This option enables support for LEDs connected to the Texas
419 To compile this driver as a module, choose M here: the
430 To compile this driver as a module, choose M here: the
442 This option supports common operations for LP5521/5523/55231/5562/5569/
503 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
512 This option enables support for the display cluster LEDs
525 To compile this driver as a module, choose M here: the
533 This driver makes the mail LED accessible from userspace
534 programs through the LEDs subsystem. This LED has three
538 or through /sys/class/leds/clevo::mail/brightness. As this LED
543 This module can drive the mail LED for the following notebooks:
556 To compile this driver as a module, choose M here: the
564 This option enables support for LEDs connected to PCA955x
584 This option enables support for LEDs connected to the PCA963x
593 This option enables support for LEDs connected to PCA995x
602 This option enables support for LEDs available on embedded
605 This driver can also be built as a module. If so, the module
613 This option enables support for the status LEDs of the WM831x
621 This option enables support for LEDs driven by the Wolfson
629 This option enables support for on-chip LED drivers found
637 This option enables support for on-chip LED drivers found
645 This option enables support for DAC124S085 SPI DAC from NatSemi,
653 This option enables support for pwm driven LEDs
660 This option enables support for regulator driven LEDs.
668 This option enables support for BD2606MVV LED driver chips
673 To compile this driver as a module, choose M here: the module will
681 This option enables support for BD2802GU RGB LED driver chips
690 This option enables support for the Intel SS4200 series of
692 drive or power LEDs on the front panel. Using this driver
700 This option enables support for LEDs driven by a Linear Technology
701 LT3593 controller. This controller uses a special one-wire pulse
709 This option enables support for on-chip LED drivers found
712 To compile this driver as a module, choose M here: the module will
720 This option enables support for the Maxim MAX5970 & MAX5978 smart
723 To compile this driver as a module, choose M here: the module will
731 This option enables support for on-chip LED drivers found
740 This option enables support for the dual-GPIO LEDs found on the
755 This option enables support for LEDs found on the LaCie 2Big
763 This option enables support for LEDs connected to TC6507
772 This option enables support for Texas Instruments TLC59108
785 This option enables support for on-chip LED drivers on
793 This option enables support for LEDs connected to LM3554
800 This option enables support for the LEDs on the Bachmann OT200.
809 This driver can also be built as a module. If so the module
817 This option enables support for LEDs connected to ISSI IS31FL319x
821 This driver can also be built as a module. If so the module will be
840 This driver can also be built as a module. If so the module will be
847 This option enables support for the UP board LEDs.
849 This driver can also be built as a module. If so the module will be
859 This option enables support for the BlinkM RGB LED connected
867 This option enables multicolor sysfs class support for BlinkM LED and
876 This option enables support for the system LEDs present on
877 PowerNV platforms. Say 'y' to enable this support in kernel.
878 To compile this driver as a module, choose 'm' here: the module
887 This option enables support for the LEDs on syscon type
888 devices. This will only work with device tree enabled
896 Choose this option if you want to use the LED drivers in
904 This option enables support for the LEDs on the Mellanox
911 This option enables support for the LEDs on the Mellanox Ethernet and
913 device add call. Say Y to enable these. To compile this driver as a
920 This option enables support for userspace LEDs. Say 'y' to enable this
921 support in kernel. To compile this driver as a module, choose 'm' here:
929 This option enables support for the User1 and User2 LEDs on NI
932 To compile this driver as a module, choose M here: the module
940 This option enables support for LED controller which use a single byte
949 This supports common features between the TI LM3532, LM3631, LM3632,
958 This supports the LED device LM3697.
966 This supports the LED device LM36274.
984 This driver supports TPS61050/TPS61052 LED chips.
993 This option enables support for the Red and White LEDs of
996 To compile this driver as a module, choose M here: the module
1003 This option enables support for the Power Button LED of