Lines Matching full:if
11 If unsure, say Y.
13 if INPUT_TOUCHSCREEN
19 Say Y here if you have a 88PM860x PMIC and want to enable
22 If unsure, say N.
32 Say Y here if you have a touchscreen interface using the
37 If HWMON is selected, and the driver is told the reference voltage
41 If unsure, say N (but it's safe to say "Y").
50 Say Y here if you have a touchscreen interface using the
54 If unsure, say N (but it's safe to say "Y").
62 Say Y here if you want to support a touchscreen interface using
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
87 If unsure, say N (but it's safe to say "Y").
98 Say Y here if you want to use the generic ADC
101 If unsure, say N (but it's safe to say "Y").
110 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
113 If unsure, say N.
123 Say Y here if you have Atmel mXT series I2C touchscreen,
126 If unsure, say N.
137 Say Y here if you want support to output data from the T37
145 Say Y here if you have a AUO display with in-cell touchscreen
148 If unsure, say N.
157 Say Y here if you have a bu21013 touchscreen connected to
160 If unsure, say N.
169 Say Y here if you have a Rohm BU21029 touchscreen controller
172 If unsure, say N.
183 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
185 If unsure, say N.
194 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
196 If unsure, say N.
205 Say Y here if you have a Cypress CY8CTMA140 capacitive
208 If unsure, say N.
218 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
221 If unsure, say N.
229 Say Y here if you have a touchscreen using controller from
234 If unsure, say N.
243 Say Y here if the touchscreen is connected via I2C bus.
252 Say Y here if the touchscreen is connected via SPI bus.
266 Say Y here if you have a Cypress Gen5 touchscreen.
268 If unsure, say N.
281 If unsure, say N.
293 If unsure, say N.
302 Say Y here if you have a Dynapro serial touchscreen connected to
305 If unsure, say N.
314 Say Y here if you have a Hampshire serial touchscreen connected to
317 If unsure, say N.
365 Say Y here if you have the Fujitsu touchscreen (such as one
369 If unsure, say N.
379 Say Y here if you have the Goodix touchscreen (such as one
384 If unsure, say N.
398 Say Y here if you have a Goodix Berlin IC connected to
401 If unsure, say N.
412 Say Y here if you have a Goodix Berlin IC connected to
415 If unsure, say N.
425 Say Y here if you have a touchscreen using HiDeep.
427 If unsure, say N.
437 Say Y here if you have a touchscreen using Hycon hy46xx
439 If unsure, say N.
448 Say Y here if you have a touchscreen using a Hynitron
451 If unsure, say N.
461 Say Y here if you have a ILI210X based touchscreen
467 If unsure, say N.
476 Say Y here if you have touchscreen with ILITEK touch IC,
479 If unsure, say N.
488 Say Y here if you want to add support for the IPROC touch
491 If unsure, say N.
500 Say Y if you have the Samsung S6SY761 driver
502 If unsure, say N
511 Say Y here if you have the Gunze AHL-51 touchscreen connected to
514 If unsure, say N.
523 Say Y here if you have an Elan eKTF2127 touchscreen
526 If unsure, say N.
535 Say Y here if you have an Elan eKTH I2C touchscreen
538 If unsure, say N.
547 Say Y here if you have an Elo serial touchscreen connected to
550 If unsure, say N.
559 Say Y here if you have an Wacom W8001 penabled serial touchscreen
562 If unsure, say N.
571 Say Y here if you want to use the I2C version of the Wacom
574 If unsure, say N.
583 Say Y here if you have a LPC32XX device and want
593 Say Y here if you have a MAX11801 based touchscreen
596 If unsure, say N.
605 Say Y here if you have the MELFAS MMS114 touchscreen controller
608 If unsure, say N.
617 Say Y here if you have a MELFAS MIP4 Touchscreen device.
619 If unsure, say N.
629 Say Y here if you have an I2C touchscreen using MStar msg2638.
631 If unsure, say N.
640 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
643 If unsure, say N.
652 Say Y here if you have a Novatek NT11205 touchscreen.
653 If unsure, say N.
662 Say Y here if you have an Imagis IST30xxC touchscreen.
663 If unsure, say N.
672 Say Y here if you have a Freescale i.MX6UL, and want to
675 If unsure, say N.
684 Say Y here if you have an iNexio serial touchscreen connected to
687 If unsure, say N.
696 Say Y here if you have the ICS MicroClock MK712 touchscreen
699 If unsure, say N.
708 Say Y here if you have a HP Jornada 620/660/680/690 and want to
718 Say Y here if you have a HP Jornada 710/720/728 and want
731 If unsure, say N.
740 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
743 If unsure, say N.
752 Say Y here if you have a Penmount serial touchscreen connected to
755 If unsure, say N.
765 Say Y here if you have an EDT "Polytouch" touchscreen based
769 If unsure, say N.
778 Say Y here if you have the official Raspberry Pi 7 inch screen on
781 If unsure, say N.
792 If unsure, say N.
801 Say Y here if you have a Touchright serial touchscreen connected to
804 If unsure, say N.
813 Say Y here if you have a Touchwin serial touchscreen connected to
816 If unsure, say N.
825 Say Y here if you have 4/5/8 wire touchscreen controller
828 If unsure, say N.
837 Say Y here if you have a pixcir i2c touchscreen
840 If unsure, say N.
849 Say Y here if you have a Weida WDT87XX I2C touchscreen
852 If unsure, say N.
871 Say Y here if you have a Wolfson Microelectronics WM97xx
876 If unsure, say N.
913 If unsure, say N.
950 Say Y here if you have a touchscreen connected to the low-resolution
969 Say Y here if you have an Freescale MC13783 PMIC on your
972 If unsure, say N.
979 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
984 bool "PanJit device support" if EXPERT
989 bool "3M/Microtouch EX II series device support" if EXPERT
994 bool "ITM device support" if EXPERT
999 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1004 bool "Gunze AHL61 device support" if EXPERT
1009 bool "DMC TSC-10/25 device support" if EXPERT
1014 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1019 bool "IdealTEK URTC1000 device support" if EXPERT
1024 bool "GeneralTouch Touchscreen device support" if EXPERT
1029 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1034 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1039 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1044 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1049 bool "Zytronic controller" if EXPERT
1054 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1059 bool "NEXIO/iNexio device support" if EXPERT
1064 bool "EasyTouch USB Touch controller device support" if EXPERT
1067 Say Y here if you have an EasyTouch USB Touch controller.
1068 If unsure, say N.
1074 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1076 If unsure, say N.
1087 Say Y here if you have a touchscreen on a TS-4800 board.
1092 If unsure, say N.
1101 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1104 If unsure, say N.
1118 Say Y here if you have a TSC2004 based touchscreen.
1120 If unsure, say N.
1131 Say Y here if you have a TSC2005 based touchscreen.
1133 If unsure, say N.
1142 Say Y here if you have a TSC2007 based touchscreen.
1144 If unsure, say N.
1163 Say Y here if you have a Motorola EZX telephone and
1174 Say Y here if you have Raydium series I2C touchscreen,
1177 If unsure, say N.
1186 Say Y here if you have the Silead touchscreen connected to
1189 If unsure, say N.
1202 If unsure, say N.
1211 Say Y here if you want to support the Sitronix ST1232
1214 If unsure, say N.
1224 Say Y here if you want support for STMicroelectronics
1235 Say Y here if you want support for STMicroelectronics
1259 Say Y here if you want support for the Samsung SUR40 touchscreen
1270 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1273 If unsure, say N.
1282 Say Y here if you have a Semtech SX8654 touchscreen controller.
1284 If unsure, say N
1293 Say Y here if you have a TPS6507x based touchscreen
1296 If unsure, say N.
1305 Say Y here if you have a touchscreen using Zeitec ZET6223
1307 If unsure, say N.
1317 Say Y here if you have a touchscreen using the zforce
1320 If unsure, say N.
1330 Say Y here if you have a Colibri VF50 and plan to use
1333 If unsure, say N.
1342 Say Y here if you have a touchscreen using ROHM BU21023/24.
1344 If unsure, say N.
1373 Say Y here if you have a touchscreen using Zinitix bt541,
1376 If unsure, say N.
1388 If unsure, say N.