Lines Matching +full:re +full:- +full:config
1 # SPDX-License-Identifier: GPL-2.0
24 config KVM_GUEST
34 config EPAPR_PARAVIRT
35 bool "ePAPR para-virtualization support"
37 Enables ePAPR para-virtualization support for guests.
41 config PPC_HASH_MMU_NATIVE
46 a hypervisor. This option is not user-selectable but should
49 config PPC_OF_BOOT_TRAMPOLINE
62 config PPC_DT_CPU_FTRS
63 bool "Device-tree based CPU feature discovery & setup"
71 If you're not sure say Y.
73 config UDBG_RTAS_CONSOLE
77 config PPC_SMP_MUXED_IPI
85 config IPIC
88 config MPIC
91 config MPIC_TIMER
102 config FSL_MPIC_TIMER_WAKEUP
110 config PPC_EPAPR_HV_PIC
114 config MPIC_WEIRD
117 config MPIC_MSGR
122 registers are used for inter-processor communication.
124 config PPC_I8259
127 config U3_DART
131 config PPC_RTAS
134 config RTAS_ERROR_LOGGING
138 config PPC_RTAS_DAEMON
142 config RTAS_PROC
147 config RTAS_FLASH
151 config MMIO_NVRAM
154 config MPIC_U3_HT_IRQS
157 config MPIC_BROKEN_REGREAD
167 config EEH
172 config PPC_MPC106
175 config PPC_970_NAP
178 config PPC_P7_NAP
181 config PPC_BOOK3S_IDLE
185 config PPC_INDIRECT_PIO
189 config PPC_INDIRECT_MMIO
192 config PPC_IO_WORKAROUNDS
203 config TAU
204 bool "On-chip CPU temperature sensor support"
207 G3 and G4 processors have an on-chip temperature sensor called the
208 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
209 temperature within 2-4 degrees Celsius. This option shows the current
210 on-die temperature in /proc/cpuinfo if the cpu supports it.
215 config TAU_INT
222 a timer is used to re-check the temperature periodically.
226 config TAU_AVERAGE
241 config QE_GPIO
247 Say Y here if you're going to use hardware that connects to the
250 config CPM2
263 config FSL_ULI1575
274 config CPM
278 config OF_RTC
284 config GEN_RTC
295 config MCU_MPC8349EMITX
296 bool "MPC8349E-mITX MCU driver"
300 Say Y here to enable soft power-off functionality on the Freescale
301 boards with the MPC8349E-mITX-compatible MCU chips. This driver will