Lines Matching +full:input +full:- +full:depth
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
24 stdout-path = "serial0:115200n8";
32 d1_8v: regulator-1v8 {
33 compatible = "regulator-fixed";
34 regulator-name = "D1.8V";
35 regulator-min-microvolt = <1800000>;
36 regulator-max-microvolt = <1800000>;
37 regulator-boot-on;
38 regulator-always-on;
41 d3_3v: regulator-3v3 {
42 compatible = "regulator-fixed";
43 regulator-name = "D3.3V";
44 regulator-min-microvolt = <3300000>;
45 regulator-max-microvolt = <3300000>;
46 regulator-boot-on;
47 regulator-always-on;
51 compatible = "gpio-keys";
53 key-a {
56 wakeup-source;
57 debounce-interval = <20>;
60 key-b {
63 wakeup-source;
64 debounce-interval = <20>;
69 vcc_sdhi0: regulator-vcc-sdhi0 {
70 compatible = "regulator-fixed";
72 regulator-name = "SDHI0 Vcc";
73 regulator-min-microvolt = <3300000>;
74 regulator-max-microvolt = <3300000>;
77 enable-active-high;
80 hdmi-out0 {
81 compatible = "hdmi-connector";
86 remote-endpoint = <&adv7513_0_out>;
91 hdmi-out1 {
92 compatible = "hdmi-connector";
97 remote-endpoint = <&adv7513_1_out>;
103 compatible = "fixed-clock";
104 #clock-cells = <0>;
105 clock-frequency = <74250000>;
110 clock-frequency = <20000000>;
117 phy-mode = "mii";
118 interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>;
119 smsc,irq-push-pull;
120 smsc,save-mac-address;
121 reg-io-width = <4>;
122 vddvario-supply = <&d3_3v>;
123 vdd33a-supply = <&d3_3v>;
125 pinctrl-0 = <&lan89218_pins>;
126 pinctrl-names = "default";
179 timeout-sec = <60>;
184 pinctrl-0 = <&scif0_pins>;
185 pinctrl-names = "default";
191 pinctrl-0 = <&can0_pins>;
192 pinctrl-names = "default";
198 pinctrl-0 = <&can1_pins>;
199 pinctrl-names = "default";
205 pinctrl-0 = <&sdhi0_pins>;
206 pinctrl-names = "default";
208 vmmc-supply = <&vcc_sdhi0>;
209 cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
214 pinctrl-0 = <&qspi_pins>;
215 pinctrl-names = "default";
219 compatible = "spansion,s25fl512s", "jedec,spi-nor";
221 spi-max-frequency = <30000000>;
222 spi-tx-bus-width = <4>;
223 spi-rx-bus-width = <4>;
224 spi-cpol;
225 spi-cpha;
226 m25p,fast-read;
229 compatible = "fixed-partitions";
230 #address-cells = <1>;
231 #size-cells = <1>;
236 read-only;
241 read-only;
253 clock-frequency = <400000>;
263 reg-names = "main", "edid", "cec", "packet";
265 avdd-supply = <&d1_8v>;
266 dvdd-supply = <&d1_8v>;
267 pvdd-supply = <&d1_8v>;
268 dvdd-3v-supply = <&d3_3v>;
269 bgvdd-supply = <&d1_8v>;
271 adi,input-depth = <8>;
272 adi,input-colorspace = "rgb";
273 adi,input-clock = "1x";
276 #address-cells = <1>;
277 #size-cells = <0>;
282 remote-endpoint = <&du_out_rgb0>;
289 remote-endpoint = <&hdmi_con0>;
298 reg-names = "main", "edid", "cec", "packet";
300 avdd-supply = <&d1_8v>;
301 dvdd-supply = <&d1_8v>;
302 pvdd-supply = <&d1_8v>;
303 dvdd-3v-supply = <&d3_3v>;
304 bgvdd-supply = <&d1_8v>;
306 adi,input-depth = <8>;
307 adi,input-colorspace = "rgb";
308 adi,input-clock = "1x";
311 #address-cells = <1>;
312 #size-cells = <0>;
317 remote-endpoint = <&du_out_rgb1>;
324 remote-endpoint = <&hdmi_con1>;
332 pinctrl-0 = <&du0_pins>, <&du1_pins>;
333 pinctrl-names = "default";
336 clock-names = "du.0", "du.1", "dclkin.0";
342 remote-endpoint = <&adv7513_0_in>;
347 remote-endpoint = <&adv7513_1_in>;