Lines Matching +full:sda +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2015-2016 Renesas Electronics Corporation
11 * SSI-AK4643
38 /dts-v1/;
40 #include <dt-bindings/gpio/gpio.h>
41 #include <dt-bindings/input/input.h>
63 stdout-path = "serial0:115200n8";
77 compatible = "gpio-keys";
79 pinctrl-0 = <&keyboard_pins>;
80 pinctrl-names = "default";
82 key-1 {
84 label = "SW2-1";
85 wakeup-source;
86 debounce-interval = <20>;
87 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
89 key-2 {
91 label = "SW2-2";
92 wakeup-source;
93 debounce-interval = <20>;
94 gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
96 key-3 {
98 label = "SW2-3";
99 wakeup-source;
100 debounce-interval = <20>;
101 gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
103 key-4 {
105 label = "SW2-4";
106 wakeup-source;
107 debounce-interval = <20>;
108 gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
113 compatible = "gpio-leds";
115 gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
118 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
121 gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
125 fixedregulator1v8: regulator-1v8 {
126 compatible = "regulator-fixed";
127 regulator-name = "fixed-1.8V";
128 regulator-min-microvolt = <1800000>;
129 regulator-max-microvolt = <1800000>;
130 regulator-boot-on;
131 regulator-always-on;
134 fixedregulator3v3: regulator-3v3 {
135 compatible = "regulator-fixed";
136 regulator-name = "fixed-3.3V";
137 regulator-min-microvolt = <3300000>;
138 regulator-max-microvolt = <3300000>;
139 regulator-boot-on;
140 regulator-always-on;
143 vcc_sdhi0: regulator-vcc-sdhi0 {
144 compatible = "regulator-fixed";
146 regulator-name = "SDHI0 Vcc";
147 regulator-min-microvolt = <3300000>;
148 regulator-max-microvolt = <3300000>;
151 enable-active-high;
154 vccq_sdhi0: regulator-vccq-sdhi0 {
155 compatible = "regulator-gpio";
157 regulator-name = "SDHI0 VccQ";
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <3300000>;
161 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
162 gpios-states = <1>;
166 vcc_sdhi2: regulator-vcc-sdhi2 {
167 compatible = "regulator-fixed";
169 regulator-name = "SDHI2 Vcc";
170 regulator-min-microvolt = <3300000>;
171 regulator-max-microvolt = <3300000>;
174 enable-active-high;
177 vccq_sdhi2: regulator-vccq-sdhi2 {
178 compatible = "regulator-gpio";
180 regulator-name = "SDHI2 VccQ";
181 regulator-min-microvolt = <1800000>;
182 regulator-max-microvolt = <3300000>;
184 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
185 gpios-states = <1>;
190 compatible = "fixed-clock";
191 #clock-cells = <0>;
192 clock-frequency = <11289600>;
196 compatible = "simple-audio-card";
198 simple-audio-card,format = "left_j";
199 simple-audio-card,bitclock-master = <&sndcodec>;
200 simple-audio-card,frame-master = <&sndcodec>;
202 sndcpu: simple-audio-card,cpu {
203 sound-dai = <&rcar_sound>;
206 sndcodec: simple-audio-card,codec {
207 sound-dai = <&ak4643>;
212 vga-encoder {
216 #address-cells = <1>;
217 #size-cells = <0>;
222 remote-endpoint = <&du_out_rgb>;
228 remote-endpoint = <&vga_in>;
235 compatible = "vga-connector";
239 remote-endpoint = <&adv7123_out>;
244 hdmi-in {
245 compatible = "hdmi-connector";
250 remote-endpoint = <&adv7612_in>;
255 cec_clock: cec-clock {
256 compatible = "fixed-clock";
257 #clock-cells = <0>;
258 clock-frequency = <12000000>;
261 hdmi-out {
262 compatible = "hdmi-connector";
267 remote-endpoint = <&adv7511_out>;
272 x2_clk: x2-clock {
273 compatible = "fixed-clock";
274 #clock-cells = <0>;
275 clock-frequency = <148500000>;
278 x13_clk: x13-clock {
279 compatible = "fixed-clock";
280 #clock-cells = <0>;
281 clock-frequency = <148500000>;
284 gpioi2c1: i2c-8 {
285 #address-cells = <1>;
286 #size-cells = <0>;
287 compatible = "i2c-gpio";
289 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
290 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
291 i2c-gpio,delay-us = <5>;
294 gpioi2c2: i2c-9 {
295 #address-cells = <1>;
296 #size-cells = <0>;
297 compatible = "i2c-gpio";
299 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
300 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
301 i2c-gpio,delay-us = <5>;
305 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
309 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
315 i2cexio0: i2c-mux1 {
316 compatible = "i2c-demux-pinctrl";
317 i2c-parent = <&iic0>, <&i2c0>;
318 i2c-bus-name = "i2c-exio0";
319 #address-cells = <1>;
320 #size-cells = <0>;
324 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
328 i2cexio1: i2c-mux2 {
329 compatible = "i2c-demux-pinctrl";
330 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
331 i2c-bus-name = "i2c-exio1";
332 #address-cells = <1>;
333 #size-cells = <0>;
340 i2chdmi: i2c-mux3 {
341 compatible = "i2c-demux-pinctrl";
342 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
343 i2c-bus-name = "i2c-hdmi";
344 #address-cells = <1>;
345 #size-cells = <0>;
348 compatible = "asahi-kasei,ak4643";
349 #sound-dai-cells = <0>;
353 composite-in@20 {
359 bus-width = <8>;
360 remote-endpoint = <&vin1ep0>;
368 interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
370 clock-names = "cec";
372 avdd-supply = <&fixedregulator1v8>;
373 dvdd-supply = <&fixedregulator1v8>;
374 pvdd-supply = <&fixedregulator1v8>;
375 dvdd-3v-supply = <&fixedregulator3v3>;
376 bgvdd-supply = <&fixedregulator1v8>;
378 adi,input-depth = <8>;
379 adi,input-colorspace = "rgb";
380 adi,input-clock = "1x";
383 #address-cells = <1>;
384 #size-cells = <0>;
389 remote-endpoint = <&lvds0_out>;
396 remote-endpoint = <&hdmi_con_out>;
402 hdmi-in@4c {
405 interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
406 default-input = <0>;
409 #address-cells = <1>;
410 #size-cells = <0>;
415 remote-endpoint = <&hdmi_con_in>;
422 remote-endpoint = <&vin0ep2>;
433 i2cpwr: i2c-mux4 {
434 compatible = "i2c-demux-pinctrl";
435 pinctrl-names = "default";
436 pinctrl-0 = <&pmic_irq_pins>;
437 i2c-parent = <&iic3>, <&i2c3>;
438 i2c-bus-name = "i2c-pwr";
439 #address-cells = <1>;
440 #size-cells = <0>;
445 interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
446 interrupt-controller;
447 #interrupt-cells = <2>;
450 compatible = "dlg,da9063-rtc";
454 compatible = "dlg,da9063-watchdog";
461 interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
463 regulator-min-microvolt = <1000000>;
464 regulator-max-microvolt = <1000000>;
465 regulator-boot-on;
466 regulator-always-on;
472 pinctrl-0 = <&du_pins>;
473 pinctrl-names = "default";
478 clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
483 remote-endpoint = <&adv7123_in>;
495 remote-endpoint = <&adv7511_in>;
511 clock-frequency = <20000000>;
515 pinctrl-0 = <&scif_clk_pins>;
516 pinctrl-names = "default";
551 power-source = <3300>;
557 power-source = <1800>;
563 power-source = <3300>;
569 power-source = <1800>;
675 bias-pull-up;
680 pinctrl-0 = <ðer_pins>, <&phy1_pins>;
681 pinctrl-names = "default";
683 phy-handle = <&phy1>;
684 renesas,ether-link-active-low;
687 phy1: ethernet-phy@1 {
688 compatible = "ethernet-phy-id0022.1537",
689 "ethernet-phy-ieee802.3-c22";
691 interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
692 micrel,led-mode = <1>;
693 reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
702 pinctrl-0 = <&mmc1_pins>;
703 pinctrl-names = "default";
705 vmmc-supply = <&fixedregulator3v3>;
706 bus-width = <8>;
707 non-removable;
716 pinctrl-0 = <&qspi_pins>;
717 pinctrl-names = "default";
722 compatible = "spansion,s25fl512s", "jedec,spi-nor";
724 spi-max-frequency = <30000000>;
725 spi-tx-bus-width = <4>;
726 spi-rx-bus-width = <4>;
727 spi-cpha;
728 spi-cpol;
729 m25p,fast-read;
732 compatible = "fixed-partitions";
733 #address-cells = <1>;
734 #size-cells = <1>;
739 read-only;
744 read-only;
755 pinctrl-0 = <&scif0_pins>;
756 pinctrl-names = "default";
762 pinctrl-0 = <&scifa1_pins>;
763 pinctrl-names = "default";
769 clock-frequency = <14745600>;
773 pinctrl-0 = <&msiof1_pins>;
774 pinctrl-names = "default";
781 spi-max-frequency = <6000000>;
782 spi-cpol;
783 spi-cpha;
788 pinctrl-0 = <&sdhi0_pins>;
789 pinctrl-1 = <&sdhi0_pins_uhs>;
790 pinctrl-names = "default", "state_uhs";
792 vmmc-supply = <&vcc_sdhi0>;
793 vqmmc-supply = <&vccq_sdhi0>;
794 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
795 sd-uhs-sdr50;
796 sd-uhs-sdr104;
801 pinctrl-0 = <&sdhi2_pins>;
802 pinctrl-1 = <&sdhi2_pins_uhs>;
803 pinctrl-names = "default", "state_uhs";
805 vmmc-supply = <&vcc_sdhi2>;
806 vqmmc-supply = <&vccq_sdhi2>;
807 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
808 sd-uhs-sdr50;
813 cpu0-supply = <&vdd_dvfs>;
817 pinctrl-0 = <&i2c0_pins>;
818 pinctrl-names = "i2c-exio0";
822 pinctrl-0 = <&iic0_pins>;
823 pinctrl-names = "i2c-exio0";
827 pinctrl-0 = <&i2c1_pins>;
828 pinctrl-names = "i2c-exio1";
832 pinctrl-0 = <&iic1_pins>;
833 pinctrl-names = "i2c-exio1";
837 pinctrl-0 = <&i2c2_pins>;
838 pinctrl-names = "i2c-hdmi";
840 clock-frequency = <100000>;
844 pinctrl-0 = <&iic2_pins>;
845 pinctrl-names = "i2c-hdmi";
847 clock-frequency = <100000>;
851 pinctrl-0 = <&i2c3_pins>;
852 pinctrl-names = "i2c-pwr";
856 pinctrl-0 = <&iic3_pins>;
857 pinctrl-names = "i2c-pwr";
862 pinctrl-0 = <&usb0_pins>;
863 pinctrl-names = "default";
868 pinctrl-0 = <&usb1_pins>;
869 pinctrl-names = "default";
874 pinctrl-0 = <&usb2_pins>;
875 pinctrl-names = "default";
880 pinctrl-0 = <&usb2_pins>;
881 pinctrl-names = "default";
886 pinctrl-0 = <&hsusb_pins>;
887 pinctrl-names = "default";
888 renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
897 pinctrl-0 = <&vin0_pins>;
898 pinctrl-names = "default";
904 remote-endpoint = <&adv7612_out>;
905 bus-width = <24>;
906 hsync-active = <0>;
907 vsync-active = <0>;
908 pclk-sample = <1>;
909 data-active = <1>;
916 pinctrl-0 = <&vin1_pins>;
917 pinctrl-names = "default";
923 remote-endpoint = <&adv7180>;
924 bus-width = <8>;
930 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
931 pinctrl-names = "default";
934 #sound-dai-cells = <0>;
947 timeout-sec = <60>;
952 shared-pin;