Lines Matching +full:monitor +full:- +full:interval +full:- +full:ms
10 Addresses: I2C 0x40 - 0x4f
20 Addresses: I2C 0x40 - 0x4f
30 Addresses: I2C 0x40 - 0x4f
40 Addresses: I2C 0x40 - 0x4f
50 Addresses: I2C 0x40 - 0x4f
60 Addresses: I2C 0x40 - 0x4f
70 Addresses: I2C 0x40 - 0x4f
80 -----------
82 The INA219 is a high-side current shunt and power monitor with an I2C
86 The INA220 is a high or low side current shunt and power monitor with an I2C
89 The INA226 is a current shunt and power monitor with an I2C interface.
93 with an I2C interface. The chips monitor both a shunt voltage drop and
96 INA260 is a high or low side current and power monitor with integrated shunt
99 The SY24655 is a high- and low-side current shunt and power monitor with an I2C
104 The shunt value in micro-ohms can be set via platform data or device tree at
105 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
110 Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
113 lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
114 The actual programmed interval may vary from the desired value.
117 ---------------------
128 ------------------------------------------------------------------------
150 ------------------------------
158 - Configure `shunt_resistor` before configure `power1_crit`, because power
160 - Because of the underlying register implementation, only one `*crit` setting