Lines Matching full:led

1 What:		/sys/class/leds/<led>/device_name
8 What:		/sys/class/leds/<led>/interval
13 		Specifies the duration of the LED blink in milliseconds.
21 What:		/sys/class/leds/<led>/link
28 		If set to 0 (default), the LED's normal state is off.
30 		If set to 1, the LED's normal state reflects the link state
32 		Setting this value also immediately changes the LED state.
35 What:		/sys/class/leds/<led>/tx
42 		If set to 0 (default), the LED will not blink on transmission.
44 		If set to 1, the LED will blink for the milliseconds specified
50 What:		/sys/class/leds/<led>/rx
57 		If set to 0 (default), the LED will not blink on reception.
59 		If set to 1, the LED will blink for the milliseconds specified
65 What:		/sys/class/leds/<led>/offloaded
70 		Communicate whether the LED trigger modes are offloaded to
73 		If 0, the LED is using software fallback to blink.
75 		If 1, the LED blinking in requested mode is offloaded to
78 What:		/sys/class/leds/<led>/link_10
85 		If set to 0 (default), the LED's normal state is off.
87 		If set to 1, the LED's normal state reflects the link state
89 		Setting this value also immediately changes the LED state.
93 What:		/sys/class/leds/<led>/link_100
100 		If set to 0 (default), the LED's normal state is off.
102 		If set to 1, the LED's normal state reflects the link state
104 		Setting this value also immediately changes the LED state.
108 What:		/sys/class/leds/<led>/link_1000
115 		If set to 0 (default), the LED's normal state is off.
117 		If set to 1, the LED's normal state reflects the link state
119 		Setting this value also immediately changes the LED state.
123 What:		/sys/class/leds/<led>/link_2500
130 		If set to 0 (default), the LED's normal state is off.
132 		If set to 1, the LED's normal state reflects the link state
134 		Setting this value also immediately changes the LED state.
138 What:		/sys/class/leds/<led>/link_5000
145 		If set to 0 (default), the LED's normal state is off.
147 		If set to 1, the LED's normal state reflects the link state
149 		Setting this value also immediately changes the LED state.
153 What:		/sys/class/leds/<led>/link_10000
160 		If set to 0 (default), the LED's normal state is off.
162 		If set to 1, the LED's normal state reflects the link state
164 		Setting this value also immediately changes the LED state.
168 What:		/sys/class/leds/<led>/half_duplex
175 		If set to 0 (default), the LED's normal state is off.
177 		If set to 1, the LED's normal state reflects the link half
179 		Setting this value also immediately changes the LED state.
181 What:		/sys/class/leds/<led>/full_duplex
188 		If set to 0 (default), the LED's normal state is off.
190 		If set to 1, the LED's normal state reflects the link full
192 		Setting this value also immediately changes the LED state.