| CHANGELOG.md (6d23ba053b9b0134ffe8e85c0f6a4a63f016f094) | CHANGELOG.md (6d27add13e68f5dfe8d0f4fdcf5246c97c79a8a6) |
|---|---|
| 1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 | 1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 |
| 7--- 8 |
|
| 7## [Unreleased] 8 9### Changed | 9## [Unreleased] 10 11### Changed |
| 10- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 11- replaced stm 12- gatt_client: emit query complete event for signed write operation 13- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 14 is defined, an explicit delete field is used to indicate an invalid entry. | |
| 15- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 16 17### Fixed | 12- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 13 14### Fixed |
| 18- SM: Use provided authentication requirements in slave security request | 15 16### Added 17 18--- 19 20## Changes May 2019 21 22### Changed 23- ESP32: Configure SCO over HCI after power up 24- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 25 is defined, an explicit delete field is used to indicate an invalid entry. 26### Fixed 27- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 28### Added 29- gatt_client: emit query complete event for signed write operation 30- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 31 32--- 33 34## Changes April 2019 35 36### Changed |
| 19- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release | 37- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release |
| 38 39### Fixed 40- hci: pad LE Scan response with zeroes |
|
| 20- SM: store local CSRK 21- ATT DB: call write callback for validated signed writes 22- ATT Server: abort signed write validation on incoming new request 23- Bluetooth SIG web scraping tools updated | 41- SM: store local CSRK 42- ATT DB: call write callback for validated signed writes 43- ATT Server: abort signed write validation on incoming new request 44- Bluetooth SIG web scraping tools updated |
| 24- ESP32: Configure SCO over HCI after power up | |
| 25- libusb: compiles for FreeBSD | 45- libusb: compiles for FreeBSD |
| 26- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) | |
| 27 28### Added | 46 47### Added |
| 48 49--- 50 51## Changes March 2019 52 53### Changed 54- use Makefile for stm32-f4discovery-cc256x port 55- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 56 57### Fixed 58- SM: Use provided authentication requirements in slave security request 59 60### Added 61- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone |
|
| 29- SM: Track if connection encryption is based on LE Secure Connection pairing 30- ATT DB: Validate if connection encrypted is based on SC if requested 31- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 32- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags | 62- SM: Track if connection encryption is based on LE Secure Connection pairing 63- ATT DB: Validate if connection encrypted is based on SC if requested 64- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 65- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags |
| 33- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone | 66- ESP32: erase nvs flash is newer nvs version found |
| 34- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example | 67- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example |
| 35- port for Nucelo L073RZ with EM9304 DVK: stm32-l073rz-nucleo-em9304 36- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND | 68- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 |
| 37 38## Changes February 2019 39 40### Changed 41- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 42- btstack_audio: split interface into sink and source 43 44### Fixed 45- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 46- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 47 48### Added 49- example/a2dp_sink_demo: add target role, support volume control on both devices 50- example/audio_duplex: playback audio audio source on audio sink (test audio path) 51- btstack_audio_embedded: implement audio source path 52 | 69 70## Changes February 2019 71 72### Changed 73- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 74- btstack_audio: split interface into sink and source 75 76### Fixed 77- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 78- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 79 80### Added 81- example/a2dp_sink_demo: add target role, support volume control on both devices 82- example/audio_duplex: playback audio audio source on audio sink (test audio path) 83- btstack_audio_embedded: implement audio source path 84 |
| 85--- 86 |
|
| 53## Changes January 2019 54 55### Changed 56- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 57- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 58 59### Added 60- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 61- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 62- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 63- ad_parser: validate data element length fields in ad_iterator_has_more 64- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 65 66### Fixed 67- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 68- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 69- Crypto: directly process queued crypto operation on HCI result 70 | 87## Changes January 2019 88 89### Changed 90- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 91- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 92 93### Added 94- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 95- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 96- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 97- ad_parser: validate data element length fields in ad_iterator_has_more 98- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 99 100### Fixed 101- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 102- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 103- Crypto: directly process queued crypto operation on HCI result 104 |
| 105--- 106 |
|
| 71## Changes December 2018 72 73### Added 74- SM: generate and store ER / IR keys in TLV, unless manually set by application 75- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 76 77### Fixed 78- SM: fix internal buffer overrun during random address generation --- 10 unchanged lines hidden (view full) --- 89### Fixed 90- SM: prevent random address updates if gap_random_address_set was used 91- SM: fix internal buffer overrun that can cause storing of bonding information to fail 92- SM: ignore Slave Security Request after sending own Pairing Request 93- L2CAP: fix use after free on disconnect if ERTM is enabled 94- HFP: Handle multiple commands/responses in single RFCOMM packet 95- Memory Pools: clear all buffers before use 96 | 107## Changes December 2018 108 109### Added 110- SM: generate and store ER / IR keys in TLV, unless manually set by application 111- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 112 113### Fixed 114- SM: fix internal buffer overrun during random address generation --- 10 unchanged lines hidden (view full) --- 125### Fixed 126- SM: prevent random address updates if gap_random_address_set was used 127- SM: fix internal buffer overrun that can cause storing of bonding information to fail 128- SM: ignore Slave Security Request after sending own Pairing Request 129- L2CAP: fix use after free on disconnect if ERTM is enabled 130- HFP: Handle multiple commands/responses in single RFCOMM packet 131- Memory Pools: clear all buffers before use 132 |
| 133--- 134 |
|
| 97## Changes October 2018 98 99### Added 100- SDP Server: queue incoming connections when already connected instead of rejecting them 101- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 102- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 103 104### Fixed 105- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 106- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 107- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 108- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 109- L2CAP ERTM: fix outgoing fragment management 110- HFP: decline incoming RFCOMM connection after outgoing connection was started 111- AVRCP: fix crash on disconnect of connection established by remote 112 | 135## Changes October 2018 136 137### Added 138- SDP Server: queue incoming connections when already connected instead of rejecting them 139- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 140- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 141 142### Fixed 143- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 144- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 145- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 146- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 147- L2CAP ERTM: fix outgoing fragment management 148- HFP: decline incoming RFCOMM connection after outgoing connection was started 149- AVRCP: fix crash on disconnect of connection established by remote 150 |
| 151--- 152 |
|
| 113## Changes September 2018 114 115### Fixed 116- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 117- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 118- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 119- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 120- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 121- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 122- RFCOMM: Avoid use-after-free on channel finalize 123- GATT Client: stop timer on disconnect - fixes use after free / crash 124 125### Added 126- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 127- 3rd-party: yxml is used for PBAP vCard list parsing 128- cc256xC: new v1.1 init scripts 129 | 153## Changes September 2018 154 155### Fixed 156- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 157- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 158- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 159- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 160- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 161- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 162- RFCOMM: Avoid use-after-free on channel finalize 163- GATT Client: stop timer on disconnect - fixes use after free / crash 164 165### Added 166- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 167- 3rd-party: yxml is used for PBAP vCard list parsing 168- cc256xC: new v1.1 init scripts 169 |
| 170--- 171 |
|
| 130## Changes August 2018 131 132### Added 133- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 134 135### Fixed 136- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 137- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys --- 13 unchanged lines hidden (view full) --- 151### Changed 152- Errata 10734: 153 - SM: Generate new EC Public Keypair after each pairing 154 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 155- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 156- windows: ignore virtual Bluetooth adapter provided by VMware 157- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 158 | 172## Changes August 2018 173 174### Added 175- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 176 177### Fixed 178- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 179- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys --- 13 unchanged lines hidden (view full) --- 193### Changed 194- Errata 10734: 195 - SM: Generate new EC Public Keypair after each pairing 196 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 197- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 198- windows: ignore virtual Bluetooth adapter provided by VMware 199- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 200 |
| 201--- 202 |
|
| 159## Changes June 2018 160 161### Fixed 162- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 163- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 164- AVRCP Controller: fix parsing of now playing info 165 166### Changed 167- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 168 169### Added 170- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 171 | 203## Changes June 2018 204 205### Fixed 206- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 207- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 208- AVRCP Controller: fix parsing of now playing info 209 210### Changed 211- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 212 213### Added 214- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 215 |
| 216--- 217 |
|
| 172## Changes May 2018 173 174### Added 175- GAP: re-encrypt outgoing connection if bonded 176- ATT Server: wait until re-encryption is complete 177- GATT Client: wait until re-encryption is complete 178- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 179- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 180 181### Changed 182- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 183 184### Fixed 185- SM: Fix LE Secure Connection pairing in Central role 186- le_device_db_tlv: fix seq nr management 187- SM: improve le_device_db lookup and storing of IRK 188- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 189- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 190 | 218## Changes May 2018 219 220### Added 221- GAP: re-encrypt outgoing connection if bonded 222- ATT Server: wait until re-encryption is complete 223- GATT Client: wait until re-encryption is complete 224- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 225- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 226 227### Changed 228- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 229 230### Fixed 231- SM: Fix LE Secure Connection pairing in Central role 232- le_device_db_tlv: fix seq nr management 233- SM: improve le_device_db lookup and storing of IRK 234- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 235- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 236 |
| 237--- 238 |
|
| 191## Changes April 2018 192 193### Added 194- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 195- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 196- Embedded: support btstack_stdin via SEGGER RTT 197 198### Changed --- 14 unchanged lines hidden (view full) --- 213- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 214 215### Fixed 216- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 217- HSP HS: accept incomming SCO connection 218- SM: fix iteration over LE Device DB entries for bonding and address resolving 219- SM: store pairing information only if both devices have requested bonding 220 | 239## Changes April 2018 240 241### Added 242- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 243- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 244- Embedded: support btstack_stdin via SEGGER RTT 245 246### Changed --- 14 unchanged lines hidden (view full) --- 261- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 262 263### Fixed 264- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 265- HSP HS: accept incomming SCO connection 266- SM: fix iteration over LE Device DB entries for bonding and address resolving 267- SM: store pairing information only if both devices have requested bonding 268 |
| 269--- 270 |
|
| 221## Changes February 2018 222 223### Added 224- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 225- SM: new event SM_EVENT_PAIRING_COMPLETE 226- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 227- GAP: add gap_delete_all_link_keys 228 229### Changed 230- GATT Client: round robin for multiple connections 231- ATT Dispatch: round robin for ATT Server & GATT Client 232- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 233- btstack_link_key_db: addition functions for link key iteration 234- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 235- CSR: set all keys in psram instead of default 236 237### Fixed 238- tc3556x: fix startup after baud rate change 239 | 271## Changes February 2018 272 273### Added 274- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 275- SM: new event SM_EVENT_PAIRING_COMPLETE 276- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 277- GAP: add gap_delete_all_link_keys 278 279### Changed 280- GATT Client: round robin for multiple connections 281- ATT Dispatch: round robin for ATT Server & GATT Client 282- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 283- btstack_link_key_db: addition functions for link key iteration 284- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 285- CSR: set all keys in psram instead of default 286 287### Fixed 288- tc3556x: fix startup after baud rate change 289 |
| 290--- |
|
| 240 241## Changes January 2018 242 243### Added 244- Port for Windows with Zephyr HCI Firmware connected via serial port 245- em9304: upload patch containers during HCI bootup 246- Makefile for STM32-F4Discovery port 247- support for console out via SEGGER RTT --- 12 unchanged lines hidden (view full) --- 260- HFP: avoid buffer overflows setting up messages 261- SBC Decoder: improved error handling for invalid SBC audio data 262- GAP: fix Connection Parameter Response in Central role 263- ATT DB Util: update pointer to database in case of realloc 264- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 265- GAP: release HCI Connnection after gap_le_conne 266- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 267 | 291 292## Changes January 2018 293 294### Added 295- Port for Windows with Zephyr HCI Firmware connected via serial port 296- em9304: upload patch containers during HCI bootup 297- Makefile for STM32-F4Discovery port 298- support for console out via SEGGER RTT --- 12 unchanged lines hidden (view full) --- 311- HFP: avoid buffer overflows setting up messages 312- SBC Decoder: improved error handling for invalid SBC audio data 313- GAP: fix Connection Parameter Response in Central role 314- ATT DB Util: update pointer to database in case of realloc 315- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 316- GAP: release HCI Connnection after gap_le_conne 317- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 318 |
| 319--- |
|
| 268 269## Changes December 2017 270 271### Added 272- Introduced btstack_network.h network interface abstraction 273- btstack_network_posix implementation using Linux tun/tap interface 274- WICED: support for btstack_stdin (HAVE_STDIN) 275- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. --- 21 unchanged lines hidden --- | 320 321## Changes December 2017 322 323### Added 324- Introduced btstack_network.h network interface abstraction 325- btstack_network_posix implementation using Linux tun/tap interface 326- WICED: support for btstack_stdin (HAVE_STDIN) 327- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. --- 21 unchanged lines hidden --- |